GE RPS12 Installation in a Lighting Automation Panel, Basic Installation Steps, Wire, Volt

	Catalog Number: RSP12
CAUTION: The power supply must be OFF when	both line-voltage and low-voltage sections. The line-
inserting or removing components. These instructions	voltage sections must be covered to avoid exposure to
assume the panel has a standard cover which exposes	live high-voltage wiring.

INSTALLATION

There are two recommended ways to install the RSP12 Remote Control Smart Sweeper — in a Lighting Automation Panel (LAP) or in an Accessory Cabinet near a Lighting Automation Panel

Installation in a Lighting Automation Panel

A complete LAP assembly includes the following TLC components:

Tub	RTUB12, -24 or -48
Cover	RCOV12xx, -24xxx or -48xxx
Interior	RINTER0012RC, -0024RC or -0048RC*
Power Supply	RPWRxxx
Relays	RR7P or RR9P

* RINTER0012RC and -0024RC accept one RSP12, RINTER0048RC accepts one or two

Details for assembling a complete Lighting Automation Panel are outlined separately in the RINTER installation instructions. Once the panel is assembled and relays are connected to the motherboard, the RSP12 may be installed.

Basic Installation Steps

1.Mount the RSP12(s) on the panel accessory bracket.

2.Wire 24V rectified power from the panel motherboard to the blue and white power input tabs on the RSP12.

3.Wire red and black connections for each relay from the panel motherboard to relay outputs on the RSP12.

4.Wire any 2- or 3-wire switch to the individual switch inputs and/or the Master switch input on the RSP12 (not on the panel motherboard).

5.Select additional control functions.

Installation in an Accessory Cabinet near the LAP

Accessory cabinets with covers include:

RBS1 Accepts one (1) RSP12

RBS2 Accepts two (2) RSP12s

Mount the RSP12 in the accessory cabinet and wire the same as above.

12-RELAY

LIGHTING

AUTOMATION

PANEL24-RELAY LIGHTING AUTOMATION PANEL

1. MOUNT RSP12 IN PANEL	48-RELAY LIGHTING
	AUTOMATION PANEL

2.	18/2 AWG
WIRE
24 VOLT
RECTIFIED		24V		24V
POWER		RECT	PILOT	RECT
			COMMON
		BLUE	YELLOW	BLUE
	24VRECT ACC
	BLUE WHITE	24VAC COM
	RSP12
				ON TLC PANEL
				MOTHERBOARD

LOAD

CIRCUIT	RED BLACK YELLOW WHITE 1
RRxP RELAY
ON TLC PANEL	20/2 AWG
MOTHERBOARD

3.			RED
			BLACK
WIRE			BLUE
RELAYS	RSP12
4. WIRE ANY 2- OR 3-WIRE SWITCHES
	20/2 AWG 1000 FT. MAX.
		RED
		BLACK
		WHITE
MAINTAINED	JUMP RED TO BLACK	RED
		BLACK
ISOLATED		WHITE
CONTACT		RED
	20/2 AWG 1000 FT. MAX.	BLACK
		WHITE
		RED
		BLACK
	JUMP BLACK TO WHITE	WHITE
		RED
2-WIRE		BLACK
MOMENTARY		WHITE
PUSH BUTTON		RED
	20/3 AWG 1000 FT. MAX.	BLACK
			RSP12
		WHITE
		RED
		BLACK
		WHITE
		RED
STANDARD		BLACK
3-WIRE		WHITE
MOMENTARY		RED
	20/3 AWG 1000 FT. MAX.	BLACK
		WHITE
		RED
		BLACK
		WHITE
		RED
STANDARD		BLACK
3-WIRE		WHITE
MAINTAINED		RED
		BLACK
		WHITE