Microwaving

Advantium Oven

To use all sensor programs

SPEED

POWER

TIMER

MICRO

 

COOK

LEVEL

WAVE

 

REPEAT LAST

 

 

 

OVEN LIGHT

 

BACK

MANUAL

OPTIONS

HELP

MICRO

 

COOK

EXPRESS

 

RECIPE

 

 

 

 

 

 

RN

TOS

ELEC

TU

T

P

TER

R

ESS TOEN

START

PAUSE

CLEAR

OFF

Advantium’s microwave mode features sensor cooking. The oven automatically senses when food is done and shuts itself off—eliminating the need to program cooktimes and power levels.

1.Press the MICROWAVE/OVEN LIGHT button.

2.Turn the dial to select the food you want. Press the dial to enter.

3.Press the dial or press the START/ PAUSE button to start cooking.

Do not open the oven door until time

is counting down in the display. If the door is opened, close it and press START/PAUSE immediately. If the food is not done enough, use TIME COOK in the microwave selector to cook for more time.

NOTE: Do not use the Sensor Features twice in succession on the same food portion—it may result in severely overcooked or burnt food.

If you have been speedcooking and the oven is already hot, it may indicate that it is too hot for sensor cooking. Of course, you can always continue with TIME COOK or SPEEDCOOK.

To shorten or lengthen the cook time, wait until the time countdown shows in the display. Then turn the dial to add or subtract time.

Drinks heated with the BEVERAGE feature may be very hot. Remove the container with care.

If you open the door while SENSOR Cooking, SENSOR ERROR will appear. Close the door, press START to begin again.

Notes about the Reheat program:

Reheated foods may have wide variations in temperature. Some areas may be extremely hot.

It is best to use TIME COOK and not REHEAT for these foods:

Bread products

Food that must be reheated uncovered.

Foods that need to be stirred or turned.

Foods calling for a dry look or crisp surface after reheating.

29

Page 29
Image 29
GE SCB2000, SCB2001 owner manual To use all sensor programs

SCB2000, SCB2001 specifications

The GE SCB2000 and SCB2001 are advanced digital protective relay systems designed for a variety of applications in the electrical power industry. These devices are recognized for their robust capabilities in protection, control, and monitoring of electrical distribution systems.

One of the primary features of the SCB2000 and SCB2001 is their comprehensive protection functionality. They are equipped to handle overload, short circuit, and earth fault protection for transformers, motors, and feeders. The advanced algorithms incorporated in these relays allow for precise detection and isolation of faults, minimizing downtime and enhancing system reliability.

These devices leverage state-of-the-art technology, including microprocessor-based controls, which ensure high performance and flexibility. The GE SCB relays are designed for easy integration into existing systems owing to their modular architecture. This functionality supports various communication protocols, including DNP3, IEC 61850, and Modbus, enabling seamless interaction with SCADA systems and other automation frameworks.

In terms of characteristics, the SCB2000 and SCB2001 provide extensive event and fault recording capabilities. They can capture a wealth of data before, during, and after events, offering valuable insights into system performance and facilitating effective troubleshooting. The user-friendly interface, typically featuring a color LCD display, allows operators to easily access critical information and configure settings.

Safety is paramount in the design of these devices. GE has implemented comprehensive self-diagnostic features that continuously monitor the relay’s health and operational status. This ensures that any potential issues are identified and addressed proactively, further reducing the risk of system failure.

Energy efficiency is another hallmark of the SCB2000 and SCB2001 series. With their intelligent design, these relays help optimize load management and energy distribution, contributing to lower operational costs for utility providers and industrial plants alike.

In conclusion, the GE SCB2000 and SCB2001 protective relay systems stand out for their versatility, advanced protective features, and seamless integration capabilities. With a focus on reliability, safety, and efficiency, these devices empower utilities and industries to enhance their electrical systems' performance, ensuring continuous and secure operation.