OPERATING INSTRUCTIONS

Changing Power Levels

The power level may be entered or changed immediately after entering the feature time for TIME COOK or TIME DEFROST. The power level may also be changed during time countdown.

Variable power levels add flexibility to microwave cooking. The power levels on the microwave oven can be compared to the surface units on a range. Power level 10 or full power is the fastest way to cook and gives you 100% power. Each power level gives you microwave energy a certain percent of the time. Power level 7 is microwave energy 70% of the time. Power level 3 is energy 30% of the time.

A high setting will cook faster but food may need more frequent stirring, rotating or turning over. Most cooking will be done on power level 10. A lower setting will cook more evenly and need less stirring or rotating of the food.

Some foods may have better flavor, texture or appearance if one of the lower settings is used. Use a lower power level when cooking foods that have a tendency to boil over, such as scalloped potatoes.

Rest periods (when the microwave energy cycles off) give time for the food to “equalize” or transfer heat to the inside of the food. An example of this is shown with power level 3—the defrost cycle. If microwave energy did not cycle off, the outside of the food would cook before the inside was defrosted.

Here are some examples of uses for various power levels:

Power Level Best Uses

High 10 Fish, bacon, vegetables, boiling liquids.

Med-High 7 Gentle cooking of meat and poultry; baking casseroles and reheating.

Medium 5 Slow cooking and tenderizing such as stews and less tender cuts of meat.

Low 2 or 3 Defrosting without cooking; simmering; delicate sauces.

Warm 1 Keeping food warm without overcooking; softening butter.

How to Change the Power Level The power level may be entered or changed immediately after entering the feature time for TIME COOK.

1.Press TIME COOK.

2.Enter cooking time.

3.Press POWER LEVEL.

4.Select desired power level 1–10.

5.Press START/PAUSE.

Time Features

Time Cook

Power level 10 (High) is automatically set, but you may change it for more flexibility.

1.Press TIME COOK.

2.Enter cooking time.

3.Change power level if you don’t want full power. (Press POWER LEVEL. Select a desired power level 1–10.)

4.Press START/PAUSE.

Time Cook

Allows you to microwave for any time up to 99 minutes and 99 seconds.

Power level 10 is automatically set, but you may change it for more flexibility.

You may open the door during Time Cook to check the food. Close the door and press START/PAUSE to resume cooking.

7

Page 6 Page 8
Page 7
Image 7
GE SESO732 quick start Changing Power Levels, Time Features, Time Cook, Power Level Best Uses
Page 6 Page 8

SESO732 specifications

The GE SESO732 is an advanced energy meter designed for efficient monitoring and management of electrical systems in industrial and commercial applications. This device stands out due to its robust features and cutting-edge technologies, making it a valuable asset for operators aiming to optimize energy usage and ensure compliance with energy regulations.

One of the primary features of the GE SESO732 is its high-accuracy measurement capability. It provides precise readings of voltage, current, power, and energy, enabling users to monitor their energy consumption accurately. This accuracy is vital for industries where energy costs significantly impact operational efficiency and profitability.

The SESO732 incorporates advanced connectivity options. Its built-in communication protocols, including Modbus and Ethernet, allow for seamless integration into existing control systems. This connectivity facilitates real-time data transmission, enabling facility managers to access critical information remotely and make informed decisions promptly.

In addition to basic measurement functions, the meter has powerful data logging capabilities. It can store historical data for various electrical parameters, allowing users to analyze trends over time. This feature is essential for identifying inefficiencies and areas for improvement, contributing to enhanced energy management strategies.

Safety is also a top priority for the GE SESO732. The device is designed to meet stringent international standards, equipped with protection features to prevent overload and ensure safe operation. Furthermore, the meter supports advanced surge protection to safeguard against electrical faults, prolonging the lifespan of both the meter itself and the connected equipment.

Another remarkable characteristic of the GE SESO732 is its user-friendly interface. The large display provides clear readings, and the intuitive navigation allows users to access different features effortlessly. Additionally, its compact design facilitates easy installation in various environments, whether mounted on a control panel or integrated within a larger electrical system.

Overall, the GE SESO732 is a sophisticated energy metering solution that combines high accuracy, advanced connectivity, comprehensive data logging, and robust safety features. Its design reflects GE's commitment to innovation in energy management technology, making it an ideal choice for businesses looking to enhance their energy efficiency and reduce operational costs. As industries worldwide increasingly focus on sustainability and performance, devices like the SESO732 will play a crucial role in achieving these goals.
Top Page Image Contents