ANY | VBD | VBD=45° | VBD=90° |
VBD=105° | HOR=90° | VBU=90° |
Fig. 2
The lamp must not be rotated in the filament plane (or electrode plane).
Fig. 1
Axial coiled coil single ended lamps will generally give better reliability against premature arcing if orientations in which the main support spine is under the filament are avoided.
92GE LIGHTING - SHOWBIZ™ ENTERTAINMENT LIGHTING CATALOGUE
Health and safety guide
Instructions for PAR64, PAR56, Closed Stage & Studio lamps Stage & Studio and Unshielded lamps
1Disconnect from power supply before removing and/or replacing lamp or fuse
2Install by holding the lamp cap and if necessary wear eye protection.
3If the lamp is handled, clean before operation with lint free cloth moistened with alcohol or Methylated Spirits.
4Avoid improper operation of the lamp e.g. at over voltage or at burning angles not designated for the lamp type or rating. Operate inseries with a quick acting high breaking capacity fuse of suitable rating. Non observation of these points may damage the lamp or equipment.
5In operation:
(a)lamps develop a high internal pressure and could shatter
(b)lamps develop a high surface temperature
(c)direct exposure may cause UV irritation to skin and eyes
The use of glass or other UV filters is advised if the lamp is used in close proximity for a prolonged period. Avoid operation in proximity to combustibles
Allow to cool before attempting replacement
6Life expired lamps should be broken in a suitable robust container or wrapping to retain flying fragments. There is a toxic content in the fill gas and larger quantities should only be broken in a well ventilated area
7Always check that replacement lamps are the correct type for the application and that rating, cap and control gear are correct
8Lamps having outer bulbs must not be operated if the outer glass is broken
GE LIGHTING - SHOWBIZ™ ENTERTAINMENT LIGHTING CATALOGUE 93