GE Single Door Refrigerator manual Installation Instructions, 2REMOVE CENTER HINGE

Installation Instructions

1REMOVE THE REFRIGERATOR DOOR (cont.)

ERemove the tape and tilt the door away from the cabinet. Lift the door off the center hinge pin. Ensure that the plastic hinge pin thimble remains on the hinge pin or inside door hinge pin hole located in the bottom of the door.

FSet the door on a non-scratching surface with the inside up.

2REMOVE CENTER HINGE

(For models without freezer door)

Remove the hinge pin from the hinge bracket. The hinge pin will be used again with the new hinge bracket for the other side.

2REMOVE THE FREEZER DOOR

(For models with freezer door)

ATape the door shut with masking tape.

BRemove hinge pin from hinge bracket. This will be used again with the new hinge bracket for the other side.

CRemove the tape and tilt the door away from the cabinet. Lift the door off the bottom hinge pin.

2REMOVE THE FREEZER DOOR

(For models with freezer door) (cont.)

DRemove the button plug from the left side of the door. Remove the door thimble from the right side of the door. Install the door thimble into the hole on the left and the button plug into the hole on the right.

ESet the door on a non-scratching surface, with the inside up.

3TRANSFER CENTER HINGE BRACKET

AUsing a 5/16″ socket ratchet/driver, remove the bolts securing the center hinge to the cabinet.

BTransfer the plug button and screw hole cover in the hinge holes on the left side to the right side.

CInstall the new center hinge bracket from the kit on the left side.

2