Using SoundStation2
Placing a Call
SoundStation2 allows you to place a call over an analog line.
1. To obtain dial tone, press the
key.
2. Dial the desired number. ► To cancel the call, press the 
key.
Answering a Call
Press the 
key or any number key to answer an incoming call. Pressing
the 
button will override all other telephone activity. The three LEDs will blink green when the phone rings.
Answering a Second Call
If you are on a call when another call is received, you will hear a Call Waiting tone.
►Press the Conference button 
to answer the incoming call. This first call will be automati- cally placed on hold.
►Switch back and forth between calls using the conference button
.
The Call waiting feature may not be available on your telephone line. Check with your telephone system administrator or service provider.
Ending a Call
To end a call, press the 
key.
Call Mute
►To mute a call, press the mute
button 
. The LEDs on the top of your SoundStation2 will glow red when your call is muted.
►To release mute, press the mute
button 
again.
SoundStation2 User Guide - 9
