Operating Instructions Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING! For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or

loss of life.

The instructions in this manual and all other literature included with this washer are not meant to cover every possible condition and situation that may occur. Good, safe practices and caution MUST be applied when installing, operating, and maintaining any appliance.

WATER HEATER SAFETY

Under certain conditions, hydrogen gas may be produced in a water heater that has not been used for two weeks or more. Hydrogen gas can be explosive under these circumstances.

If the hot water has not been used for two weeks or more, prevent the possibility of damage or injury by turning on all hot water faucets and allowing them to run for several minutes. Do this before using any electrical appliance which is connected to the hot water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.

PROPER INSTALLATION

This pedestal must be properly installed and located in accordance with the Installation Instructions before it is used.

Installation

Instructions

Tips

■Install or store where it will not be exposed to temperatures below freezing or exposed to the weather, which could cause permanent damage and invalidate the warranty.

■Properly ground washer to conform with all governing codes and ordinances. Follow details in Installation Instructions.

■This appliance must be grounded. In the event

of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. The washer

is equipped with a cord having an equipment- grounding conductor and a grounding plug. The washer plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper

connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.

Consumer Support Troubleshooting

YOUR LAUNDRY AREA

■ Keep the area underneath and around your

■ Close supervision is necessary if this appliance is

appliances free of combustible materials such as

used by or near children. Do not allow children to

lint, paper, rags and chemicals.

play on, with or inside this or any other appliance.

■Do not leave the washer door open. An open door could entice children to hang on the door or crawl inside the washer.

2

Page 1 Page 3
Page 2
Image 2
GE SPBD880 Operating Instructions Safety Instructions, Installation Instructions Tips, Lint, paper, rags and chemicals
Page 1 Page 3

SPBD880 specifications

The GE SPBD880 is an innovative and advanced circuit breaker designed to meet the demands of modern electrical systems. With a strong focus on safety, reliability, and efficiency, this model stands out in the market.

One of the main features of the SPBD880 is its ability to provide exceptional protection against overload and short-circuit conditions. This is essential in preventing damage to electrical equipment and ensuring the safety of personnel. The SPBD880 employs thermal-magnetic trip units, which combine both thermal and magnetic operating principles. This dual functionality allows for precise control and rapid response to abnormal conditions, enhancing the overall safety of the electrical system.

In addition to its robust protection mechanisms, the SPBD880 is designed for ease of use and installation. With a compact design, the breaker can fit into tight spaces, making it suitable for various applications, including industrial and commercial environments. The intuitive mounting system simplifies the installation process, reducing labor costs and installation time.

The SPBD880 also features advanced communication capabilities. It is equipped with integrated metering and monitoring technologies, allowing for real-time data collection on energy usage and system performance. This data can be invaluable for predictive maintenance practices and optimizing energy consumption, leading to reduced operational costs.

Another notable characteristic of the SPBD880 is its adaptability. It can be configured to accommodate varying system requirements, ensuring that it meets specific application needs. Whether in a standalone setup or part of a larger automated electrical system, the SPBD880 can seamlessly integrate with other devices to enhance functionality.

The environmentally friendly design of the GE SPBD880 ensures minimal impact during manufacturing and implementation. With a focus on sustainability, it utilizes materials and technologies that reduce the overall carbon footprint.

In summary, the GE SPBD880 circuit breaker combines advanced safety features, ease of use, and adaptability, making it an excellent choice for modern electrical installations. Its innovative design not only enhances protection but also promotes efficiency and sustainability, positioning it as a vital component in both industrial and commercial settings. As electrical systems evolve, the SPBD880 offers the reliability and performance needed to keep pace with technological advancements.
Top Page Image Contents