20 Chapter 2

Using On-Screen Menus

Setting Daylight-Saving Time

1. Press MENU to display the VCR MAIN MENU.
2. Press 2 to display the TIME menu.
3. Press 4 to display the SET DAYLIGHT SAVINGS menu.
4. Select one of the options.
Notes: DST stands for DaylightSaving Time.
If you choose Automatic for the time zone, the VCR sets the clock using any DST
information found in broadcast signals.
Setting Time and Date Manually
If Auto Clock Set was unsuccessful, set the time and date manually in the TIME
menu. Auto Clock Set is automatically turned off when time and date
information is set this way.
1. Press MENU to display the VCR MAIN MENU.
2. Press 2 to display the TIME menu.
3. Press 1 to display the SET TIME AND DATE menu.
4. Enter the data using the number buttons. Press 0 before single-digit
numbers and follow the on-screen directions to exit the menus.
SET DAYLIGHT SAVING
Does your area observe
Daylight Saving Time
from April to October?
1 Yes, DST is observed
2 No
3 Automatic
Press MENU to continue
Displaying Time and
Date
Pressing the INFO button on the
remote control or VCR displays the
time and date on screen
temporarily.
SET TIME AND DATE
Time --:--
(hh:mm)
Date --/--/--
Press MENU to cancel
SET TIME AND DATE
Time 12:34 PM
Date 11/16/01 Friday
Press CLEAR to correct
Press MENU to set
TIME
1 Set Time and Date
2 Auto Clock Set: ON
3 Set Time Zone
4 Set Daylight Savings
Time Data was found
on channel 20.
0 Exit