T~ PROBLEM SOL~R
(continued)
PROBLEM | I POSSIBLE CAUSE |
WASHER IS NOISY ● Make sure washer is level and firm to the floor with rubber fmt pads in place and front jam nuts tight. See your Instigation hstructions.
●A sharp, distinctive sound will be heard at the end of each spin period as the motor stops and the spin brake inside tie transmission “lwks in.” This sound is normal.
●Heavily unbalanced loads can cause the washer to vibrate excessively during spin, and may cause it to move from its original position. In extreme cases (usually occurs when washing a single, heavy item or a small load when water level is set higher than necessary), the spin basket may strike the outer tub, creating a loud but harmless noise. To correct, open the lid and redistribute the load evenly about the wash basket. Close the lid and restart.
WASHER PAUSES | ● Washer norrndly pauses between washing steps...such as between wash and spin or |
~ CYCLE | between spin and rinse. |
If you ne~ more help...~ll, toll free: GE Answer Center@ 8M.626.2~
consumer information sertice
24
—