|
| ge.com | |
|
|
|
|
|
|
|
|
OPERATION | Possible Causes | What To Do |
|
|
|
|
|
Washer won’t operate | Washer is unplugged | • Make sure cord is plugged securely into a working outlet. |
|
|
|
|
|
| Water supply is turned off | • Turn both hot and cold faucets fully on. |
|
|
|
|
|
| Controls are not set properly | • Check controls. |
|
|
|
|
|
| Lid is | • Close lid and reset cycle, to the beginning if necessary. |
|
| prevents agitation and |
|
|
| spinning when lid is up |
|
|
|
|
|
|
| Circuit breaker/fuse is | • Check house circuit breakers/fuses. Replace fuses or |
|
| tripped/blown | reset breaker. Washer should have separate outlet. |
|
|
|
| |
| Electronics need to be reset | • Unplug washer, wait 2 minutes, plug back in and press START. | |
|
|
|
|
| START was not pressed | • Press START. |
|
|
|
|
|
| Lid magnet missing | • Call for service. |
|
|
|
|
|
Time not shown | Unit filling | • This is normal. Estimated time remaining is updated during |
|
on display |
| fill time. |
|
|
|
|
|
Movement inside machine | Shifting mechanism is | • When the machine is manually turned off, the shifter will |
|
when shut off | disengaging the motor | disengage the motor before completely shutting down. |
|
|
| If lid is raised before the motor is disengaged, it will resume |
|
|
| when lid is closed. |
|
|
|
|
|
PERFORMANCE | Possible Causes | What To Do |
|
|
|
| |
Clothes too wet | Incorrect spin cycle | • Make sure the spin cycle selected matches the load you are | |
| selected | washing. Some fabrics will feel wetter when rinsed with cold water. | |
|
|
|
|
Colored spots | Incorrect use of fabric | • Check fabric softener package for instructions and follow |
|
| softener | directions for using dispenser. |
|
|
| • Pretreat stain and rewash. |
|
|
|
|
|
| Dye transfer | • Sort whites or lightly colored items from dark colors. |
|
|
|
|
|
Grayed or yellowed | Not enough detergent | • Use more detergent (especially with larger loads). |
|
clothes |
| Be sure to follow detergent manufacturer’s directions. |
|
|
|
|
|
| Hard water | • Use a water conditioner like Calgon brand or install |
|
|
| a water softener. |
|
|
|
|
|
| Water is not hot enough | • Make sure water heater is delivering water at |
|
|
|
| |
|
|
|
|
| Washer is overloaded | • Select load size to match clothes load. |
|
|
|
|
|
| Detergent is not | • Add detergent as wash basket fills with water before |
|
| dissolving | you load clothes. |
|
|
|
|
|
| Dye transfer | • Sort clothes by color. If fabric label states wash separately, |
|
|
| unstable dyes may be indicated. |
|
|
|
|
|
Lint or residue on | Clothes are air or line dried | • If you do not dry your clothes with a clothes dryer, your |
|
clothes |
| clothes may retain more lint. |
|
|
|
|
|
| Incorrect sorting | • Separate lint producers from lint collectors. |
|
|
|
|
|
| Washing too long | • Wash small loads for a shorter time than larger loads. |
|
|
|
|
|
| Detergent not dissolving | • Add detergent as wash basket fills with water, before you |
|
|
| load clothes. |
|
|
| • Try a liquid detergent. |
|
|
| • Use warmer water temperature. |
|
|
|
|
|
| Overloading | • Load clothes no higher than the top row of holes in the |
|
|
| washer basket. |
|
|
| • Make sure load size selected matches clothes load size. |
|
|
|
|
|
| Incorrect use of fabric | • Check fabric softener package for instructions |
|
| softener | and follow directions for using dispenser. | 11 |
|
|
| |
Safety Instructions
Operating Instructions
Troubleshooting Tips
Consumer Support
