Changing Front Panel (Models ZCG3100 and ZCG3300 only)
Remove drawer by pulling to first stop and lifting front to clear second stop. Place drawer on its back. Remove two screws in bottom edge of trim. Slide panel out and reverse. Reinstall trim and place drawer back in compactor.
INSTALLATION
Care and Cleaning
Electrical Requirements
CAUTION: Before Plugging In Compactor, Read The Following Electrical Requirements.
CAUTION: For Personal Safety, Do Not Use An Extension Cord Or Adapter Plug With This Appliance.
Do Not Under Any Circumstances, Cut Or Remove The Third Grounding Prong From The Power Cord.
Follow National Electrical Codes Or Prevailing Local Codes And Ordinances.
This appliance must be supplied with 120V, 60HZ and connected to an individual, properly grounded branch circuit protected by a 15 or 20 amp circuit breaker or time delay fuse.
If the electric supply provided does not meet the above requirements, call a licensed electrician.
Grounding Instructions
This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
PREFERRED |
METHOD |
Ensure proper ground |
exists before use |
DANGER: Improper connection of the equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the appliance is properly grounded.
Do not modify the plug with this appliance. If it will not fit the outlet installed, have a proper outlet installed by a qualified electrician.
Installation
This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.
9