![CARE AND CLEANING](/images/new-backgrounds/82123/8212315x1.webp)
CARE AND CLEANING
The inside and outside of your compactor are finished with durable
Cleaning—Outside
Keep the outside clean. Do not wipe with a soiled dishwashing
Stainless Steel Panels. The stainless steel panels can be cleaned with Stainless Steel Magic or a similar product using a clean, soft cloth. You can order Stainless Steel Magic (Cat. No. WX10X15) through GE Parts by calling 800.626.2002.
When going on vacation
For vacations or other extended absences, remove the trash bag to prevent a
Cleaning—Inside
To clean the cabinet interior:
1.Pull out trash drawer until it stops.
2.Lift up on drawer slightly, then pull out drawer to second stop.
3.Lift drawer up and out of compactor.
4.Vacuum clean cabinet base, track channels and drawer, particularly in corners.
5.Wash the cabinet interior and trash drawer with normal mild household cleaners, rinse and dry with a clean cloth. Be sure trash drawer is thoroughly dry before inserting a new bag.
WARNING: Glass fragments may be lying in bottom of cabinet. To avoid injury, use care in cleaning.
To clean the ram:
With trash drawer out of cabinet, remove the ram as follows:
2.Place hand on ram face, being
careful to support its entire length.
3.With other hand, press back on
front of ram, sliding it until it releases.
1.Remove bolt in
center of ram with a 1/2″ wrench.
F R O N T |
4.Clean ram with normal mild household cleaners, rinse and dry.
5.Fit ram into grooves on the compacting mechanism and slide it forward until it snaps into position.
6. Replace center bolt removed in Step 1.
CAUTION: WATCH FOR GLASS FRAGMENTS.
8