Loading tips and suggestions
Controls and Features
Beverage Center
The bottom two drawers hold six bottles each and are loaded with necks facing the rear. Tall bottles should not be loaded on the bottom drawer because they may prevent the door from closing.
Do not allow children to climb, stand or
hang on the beverage center shelves orBottom drawer drawers. They could seriously injure
themselves and possibly cause damage to the beverage center.
NOTE: This unit is for storing beverages only and not intended for the storage of perishable foods.
Pull-out drawers
The bottom drawers pull out so bottles can be easily added or removed.
The bottom drawers can also be removed to store larger bottles.
To remove:
1.Pull the drawer out to the STOP position.
2.Push the tab on right drawer guide down while pulling the tab on left guide up, and pull the drawer out.
To replace, insert the sides of the drawer back into the guides and push until the tabs snap into place.
NOTE: Make sure the tabs on the drawer guides are fully engaged before loading any bottles. Pull the drawers out all the way to the STOP position and push back in several times to make sure tabs snap into place.
Tab (push tab down on right drawer guide, pull tab up on left drawer guide)
Wood drawer fronts
The drawer fronts on the beverage center are unfinished cherry wood. During use, oil from hands may accumulate and stain the wood.
•The drawer fronts may be stained and sealed to match adjacent cabinetry. The tinted glass will make the stained wood appear darker. A true color match can be seen only when the door is opened.
•Apply the stain and sealer according to the manufacturer’s instructions. To avoid unpleasant odor, keep the door open to ventilate and allow the stain/sealer to dry completely before using the product.
NOTE: Natural wood may vary slightly in grain and color.
10
