HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The icemaker should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your icemaker by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the icemaker, be careful not to roll over or damage the power cord.

RACCORDEMENT ÉLECTRIQUE

Ne coupez ni retirez en aucun cas la troisième broche (mise à la terre) de la fiche du cordon d’alimentation. Pour votre sécurité, cet appareil doit être correctement mis à la terre.

Le cordon d’alimentation de cet appareil est muni d’une fiche à 3 broches (mise à la terre) qui se branche dans une prise mural ordinaire

à3 alvéoles (mise à la terre) pour réduire au minimum les risques du chocs électriques.

Faites examiner la prise de courant et le circuit par un électricien qualifié pour vous assurer que la prise est correctement mise à la terre.

Si la prise murale est du type standard à 2 alvéoles, il vous incombe de la faire remplacer par une prise à 3 alvéoles correctement mise à la terre.

La machine à glaçons doit toujours être branché dans sa propre prise de courant, dont la tension nominale est identique

à celle indiquée sur la plaque signalétique.

Cette précaution est recommandée pour garantir un rendement optimum et éviter une surcharge des circuits électriques de la résidence, ce qui pourrait créer un risque d’incendie par surschauffe des fils.

Ne débranchez jamais la machine à glaçons en tirant le cordon d’alimentation. Saisissez fermement la fiche du cordon et tirez droit pour la retirer de la prise.

Réparez ou remplacez immédiatement tout cordon effiloché ou endommagé. N’utilisez pas un cordon fendillé ou présentant des signes d’usure.

Lorsque vous déplacez votre machine à glaçons du mur, faites attention de ne pas la faire rouler sur le cordon d’alimentation afin de ne pas l’endommager.

6

Page 5 Page 7
Page 6
Image 6
GE ZDIS15, ZDI15 owner manual HOW to Connect Electricity, Raccordement Électrique
Page 5 Page 7

ZDI15, ZDIS15 specifications

General Electric (GE) has been a pioneering force in various technological innovations, and the GE ZDIS15 and ZDI15 Z-Wave devices exemplify their commitment to smart technology solutions. Designed for advanced monitoring and control applications, these devices offer a range of features that enhance the performance of electrical systems.

The GE ZDIS15 is a smart device that integrates seamlessly into home and industrial environments. One of its main features is its ability to communicate using Z-Wave technology, which enables wireless communication between devices. Z-Wave is a widely adopted protocol for home automation, known for its reliability, low power consumption, and long-range capabilities. This means users can control their electrical systems remotely, switching devices on and off, or programming schedules for optimal energy usage.

The ZDI15 takes this a step further by adding advanced monitoring capabilities. It allows users to keep track of electrical consumption, providing insights into usage patterns and helping to identify energy-saving opportunities. This device is equipped with real-time monitoring, enabling users to receive updates and alerts about power consumption levels, which can significantly aid in managing energy costs.

One of the standout characteristics of both devices is their user-friendly interface. GE has ensured that the setup process is straightforward, allowing users of all technical backgrounds to integrate these devices into their existing systems effortlessly. The accompanying mobile application provides an intuitive dashboard for monitoring device status, setting automation rules, and receiving notifications.

In addition to smart control and monitoring, both devices feature strong security protocols to protect user data and prevent unauthorized access. GE has integrated end-to-end encryption, ensuring that communications between devices remain secure. This is particularly important as more consumers prioritize privacy in their smart home solutions.

Durability and reliability are also hallmarks of the GE ZDIS15 and ZDI15. Designed to withstand various environmental conditions, both devices are built with high-quality materials to ensure longevity. Their compact design allows for easy installation in various locations, making them versatile for different applications.

In summary, the GE ZDIS15 and ZDI15 are advanced Z-Wave devices that offer smart control, energy monitoring, and robust security features. As part of GE’s commitment to innovation and efficiency, these devices stand out for their technological capabilities, ease of use, and reliability, making them ideal choices for modern energy management in residential and commercial settings. With the integration of these smart devices, users can enhance their energy efficiency and contribute to a more sustainable future.
Top Page Image Contents