GE ZDP366NPSS Natural Gas ZDP366LPSS Liquid Propane, Electrical Requirements, Gas Supply

ZDP366NPSS (Natural Gas)

ZDP366LPSS (Liquid Propane)

GE Monogram® 36" Dual-Fuel Professional Range with 6 Burners

Dimensions and Installation Information (in inches)

Electrical Requirements

Ranges must be supplied with 208/240V, 60Hz, and connected to an individual, properly grounded branch circuit protected by a circuit breaker or time-delay fuse. Install a 30- amp circuit for 36" ranges. The receptacle must be a NEMA 14-50R device to accept the four-prong plug on the range.

Universal Utility Locations

Locate gas and electric as shown

Gas Supply

• The natural gas models are designed to operate at 5" water column pressure. For proper operation, the pressure of the natural gas supplied to the regulator must be between 7" and 13" water column.

• The LP models are designed to operate at 10" water column pressure. For proper operation, the pressure of the LP gas supplied to the regulator must be between 11" and 13" water column.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Optional Backsplash Accessories

The range requires a 12" minimum clearance to a vertical combustible surface at the rear. A backsplash is required for installations with less than 12" clearance. The following backsplash accessories are available, or a custom, non- combustible backsplash can be used.

Order one with a 36"-wide range backsplash ZX12B36PSS–12" backsplash ZXADJB36PSS–30"-36" adjustable height

Side View with a Backsplash

Listed by

Underwriters

Laboratories

Specification Created 7/08 130556