Care and Cleaning
Wine Chiller
Unplug the wine chiller before cleaning.
Cleaning the inside
Turn the wine chiller unit OFF or unplug the unit before cleaning. Use a slightly damp cloth or sponge when cleaning around switches, lights or controls.
Use warm water and baking soda solution— about a tablespoon (15 ml) of baking soda to a quart (1 liter) of water. This both cleans and neutralizes odors. Thoroughly rinse and wipe dry.
Other parts of the wine chiller center
Drain hole
Cabinet
Glass door
Periodically check the drain hole and
channel for any debris. If the drain isDrain hole blocked, condensation will not drain
properly.
To check and clean the drain hole, remove the third and fourth drawers (see instructions on Removing full extension drawers on page 8). Sweep a damp cloth along the channel in the back of the wine chiller. Use a finger to sweep away any debris from the drain hole.
The exterior surfaces can be washed with mild soap and water.
Rinse thoroughly with clear water. Never use abrasive scouring powders.
Use a glass cleaner or mild soap and water | Avoid cleaning cold glass with hot water |
and a soft cloth to clean the glass door. | because the extreme temperature |
Do not use any abrasive powders. | difference may cause it to break. Rough |
| handling of tempered glass can cause it |
| to shatter. |
Door gasket
The vinyl gasket may be cleaned with mild soap and water, a baking soda solution or a mild scouring powder. Rinse well.
After cleaning the door gasket, apply a thin layer of paraffin wax or petroleum jelly to the door gasket at the hinge side. This helps keep the gasket from sticking and bending out of shape.
10
