Franke Consumer Products FCH 367 Care, Cleaning the Comfort Panels, Metal grease filters

CARE

REMOTE CONTROL (OPTIONAL)

This range hood can be controlled by a multi-function remote control available through your local Franke Dealer.

Cleaning the Comfort Panels

•Pull the Comfort Panel to open it.

•Disconnect the panel from the hood canopy by sliding the fix- ing pin lever.

•The comfort panel must never be washed in a dishwasher.

•Clean the outside using a damp cloth and mild liquid detergent.

• Clean the inside as well using a damp cloth and neutral deter- gent; do not use wet cloths or sponges, or jets of water; do not use abrasive substances.

•When the above operation has been completed, hook the panel back to the hood canopy and close it by turning the knob in the opposite direction.

Metal grease filters

Filters can be washed in the dishwasher. They need to be washed when FF-sign appears on the display or in any case every 2 months, or even more frequently in case of particularly intensive use of the hood.

Alarm reset

•Switch off the hood and the lights. If the 24h-function has been activated this has to be deactivated.

•Press the E-key till the display is unlit.

Cleaning the filters

•Pull the comfort panels to open them.

•Remove the filters one by one pushing them towards the back side of the hood unit and simultaneously pulling downwards.

•Any kind of bending of the filters must be avoided when wash- ing them. Before fitting them again into the hood make sure that they are completely dry. (The color of the filter surface may change throughout the time but this has no influence on the filter efficiency).

•When fitting the filters into the hood pay attention that they are mounted in correct position the handle facing outwards.

•Close the comfort panel.

EN	1
	12