Water and Ice Dispensers

IMPORTANT:

■ If necessary, remove the ice clogging the storage bin and

■ Allow 3 hours for the refrigerator to cool down and chill water.

delivery chute, using a plastic utensil.

 

■ Allow 24 hours to produce the first batch of ice. Discard the

■ Clean the ice delivery chute and the bottom of the ice storage

bin using a warm, damp cloth and dry thoroughly.

first three batches of ice produced. Allow 2 to 3 days for the

 

storage bin to fill completely following installation.

 

■The dispensing system will not operate when either refrigerator door or the freezer drawer is open.

Flush the Water System

Air in the water dispensing system can cause the water dispenser to drip. After connecting the refrigerator to a water source or replacing the water filter, flush the water system.

Flushing the water dispensing system, forces air from the water line and filter and prepares the water filter for use. Additional flushing may be required in some households.

NOTE: As air is cleared from the system, water may spurt out of the dispenser.

1.Using a sturdy container, depress and hold the water dispenser pad for 5 seconds.

2.Release the dispenser pad for 5 seconds. Repeat steps 1 and 2 until water begins to flow.

3.Once water begins to flow, continue depressing and releasing the dispenser pad (5 seconds on, 5 seconds off) until a total of 3 gal. (12 L) has been dispensed.

Dispensing

IMPORTANT:

■Hold the glass close to the dispenser opening so water or ice will fall into the glass.

■You do not need to apply a lot of pressure to the button or pad to activate the dispenser. Pressing hard will not make water or ice dispense faster or in greater quantities.

Press SELECT to toggle through the following choices in a continuous loop. The icons on the display indicate your selection.

■Water (default) - Dispenses water

■Crushed Ice - Dispenses crushed ice

NOTE: Cubes are crushed before being dispensed. This may cause a slight delay when dispensing crushed ice. Noise from the ice crusher is normal, and pieces of ice may vary in size.

■Cubed Ice - Dispenses cubed ice.

NOTE: When changing from crushed to cubed, a few ounces of crushed ice will be dispensed along with the first cubes.

Use

The Water Dispenser

IMPORTANT:

■Dispense at least 1 qt (1 L) of water every week to maintain a fresh supply.

■If the flow of water from the dispenser decreases, it could be caused by low water pressure.

To check water pressure:

■With the water filter removed, dispense 1 cup of water. If 1 cup of water is dispensed in 8 seconds or less, the water pressure to the refrigerator meets the minimum requirement.

■If it takes longer than 8 seconds to dispense 1 cup of water, the water pressure to the refrigerator is lower than recommended. See “Water Supply Requirements” and “Troubleshooting” for suggestions.

Water

Crushed

Cubed

To Dispense Water

1.Press and hold the WATER button to start dispensing water.

2.Release the button to stop dispensing.

OR

1.Press a sturdy glass against the dispenser pad.

2.Remove the glass to stop dispensing.

The Ice Dispenser

Ice dispenses from the ice maker storage bin. To turn off the ice maker, see “Ice Maker and Storage Bin.”

The dispenser may continue to make noise and ice may continue to dispense for several seconds after releasing the dispenser button or pad.

IMPORTANT: If the ice cubes are hollow or have an irregular shape, it could be because of low water pressure. See “Water Supply Requirements.”

To Clean the Ice Dispenser Chute:

Humidity causes ice to naturally clump together. Ice particles can build up until the ice dispenser chute becomes blocked.

If ice is not dispensed regularly, it may be necessary to empty the ice storage bin and clean the ice delivery chute, the ice storage bin and the area beneath the storage bin every 2 weeks.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

To Dispense Ice

1.Press the ICE button to start dispensing ice.

2.Release the button to stop dispensing.

OR

21

Page 20 Page 22
Page 21
Image 21
Maytag W10558103A manual Water and Ice Dispensers, To Dispense Water, To Clean the Ice Dispenser Chute, To Dispense Ice
Page 20 Page 22

W10558103A specifications

The Maytag W10558103A is a high-quality appliance designed to enhance the efficiency and convenience of everyday laundry tasks. This top-load agitator washing machine stands out in a crowded market thanks to its robust construction, advanced features, and user-friendly interface.

One of the most notable features of the Maytag W10558103A is its powerful Agitator system. This allows for thorough and effective cleaning of clothes, ensuring that dirt and stains are removed with ease. The agitator's design helps to move the laundry around the drum, providing an optimized wash cycle that penetrates even the toughest fabrics. This feature is particularly beneficial for families or individuals with active lifestyles who require their garments to be cleaned thoroughly.

Another highlight is the large capacity of the drum, which provides ample space for bulky items like comforters or multiple loads of laundry at once. With a capacity of 4.7 cu. ft., this washer can handle family-sized loads, saving users both time and energy. The machine is designed with efficiency in mind, allowing for fewer trips to the laundromat and reducing water and energy consumption.

The Maytag W10558103A also incorporates advanced technology with its PowerWash Cycle. This innovative cycle features extra cleaning action and a prolonged wash time, ensuring that stubborn stains are eliminated, even in heavily soiled laundry. It provides users with a tailored laundry experience, adapting to the needs of various types of fabric and soil levels.

Durability is a hallmark characteristic of Maytag appliances, and the W10558103A is no exception. Built with commercial-grade components, including a high-performance motor and stainless-steel wash basket, this washing machine is designed to withstand the rigors of daily use. The robust construction not only enhances longevity but also helps in maintaining performance over time.

Moreover, the user-friendly control panel offers a range of wash cycles, including Normal, Heavy Duty, Delicate, and Quick Wash. This versatility allows users to customize their washing experience based on the specific requirements of each load. The intuitive design makes it easy for everyone in the household to operate the machine without difficulty.

In summary, the Maytag W10558103A is a top-tier washing machine that combines powerful cleaning capabilities, ample capacity, and durable construction, making it a valuable addition to any home. With its innovative features and advanced technology, it promises to meet the diverse laundry needs of modern households while delivering reliable performance for years to come.
Top Page Image Contents