Install

3.Disconnect the wiring plug located on top of the door hinge.

Grasp each side of the wiring plug. With your left thumb, press down to release the catch and pull the sections of the plug apart.

NOTE: Do not remove the green, ground wire. It should remain attached to the door hinge.

4.Using the ³⁄₁₆" hex key wrench, remove the two internal hex head screws from the top hinge, and set aside.

NOTES:

Provide additional support for the refrigerator door while the hinges are being removed. Do not depend on the door gasket magnets to hold the door in place while you are working.

Do not remove the two locator screws. These screws will help you align the hinge when you replace the door.

AB

C

A. ³⁄₁₆" Internal hex head screws

C. Locator screws (do not

B. Ground wire (do not remove)

remove)

5.Lift the refrigerator door from the bottom hinge pin. The top hinge will come away with the door.

NOTE: It may not be necessary to remove the bottom hinges and brake feet assemblies to move the refrigerator through a doorway.

Only if necessary, use a driver with a #2 square bit tip to remove the bottom hinges and a ³⁄₈" nut driver to remove the brake feet screws.

Replace Right-Hand Refrigerator Door

1.Set the right-hand door onto the bottom hinge pin.

2.Insert the top hinge pin into the open hole in the top of the refrigerator door.

3.Using the two ³⁄₁₆" internal hex head screws, fasten the hinge to the cabinet. Do not tighten the screws completely.

Replace Left-Hand Refrigerator Door

IMPORTANT: Do not intertwine the water tubing and wiring bundles when reconnecting them.

1.Set the left-hand door onto the bottom hinge pin.

2.Using the two ³⁄₁₆" internal hex head screws, fasten the hinge to the cabinet. Do not tighten the screws completely.

3.Reconnect the water dispenser tubing.

Style 1 - Insert the tubing into the fitting until it stops and the outer ring is touching the face of fitting.

Style 2 - Insert the tubing firmly into the fitting until it stops. Close the clasp around the tubing. The clasp snaps into place between the fitting and the collar.

4.Reconnect the electrical wiring.

Push together the two sections of the wiring plug.

Final Steps

1.Completely tighten the four internal hex head screws (two on the right-hand door hinge and two on the left-hand door hinge).

2.Replace both top hinge covers.

Remove and Replace Freezer Drawer Front

Depending on the width of your door opening, it may be necessary to remove the freezer drawer front to move the refrigerator into your home.

IMPORTANT:

If the refrigerator was previously installed and you are moving it out of the home, before you begin, turn the refrigerator control OFF, and unplug the refrigerator or disconnect power. Remove food from the freezer drawer.

Two people may be required to remove and replace the freezer drawer front.

Tool Needed: ¹⁄₄" hex driver

Remove Drawer Front

1.Open the freezer drawer to its full extension.

2.Remove the two screws at the top, inside the drawer front (one on the left-hand side and one on the right-hand side) that fasten the drawer front to the drawer glides.

3.Lift up on the drawer front to release the plastic studs from the drawer glide bracket slots.

A

A. Drawer glide bracket slots

4.Slide the drawer glides back into the freezer.

8

Page 8
Image 8
Maytag W10558103A manual Remove and Replace Freezer Drawer Front, Replace Right-Hand Refrigerator Door, Final Steps

W10558103A specifications

The Maytag W10558103A is a high-quality appliance designed to enhance the efficiency and convenience of everyday laundry tasks. This top-load agitator washing machine stands out in a crowded market thanks to its robust construction, advanced features, and user-friendly interface.

One of the most notable features of the Maytag W10558103A is its powerful Agitator system. This allows for thorough and effective cleaning of clothes, ensuring that dirt and stains are removed with ease. The agitator's design helps to move the laundry around the drum, providing an optimized wash cycle that penetrates even the toughest fabrics. This feature is particularly beneficial for families or individuals with active lifestyles who require their garments to be cleaned thoroughly.

Another highlight is the large capacity of the drum, which provides ample space for bulky items like comforters or multiple loads of laundry at once. With a capacity of 4.7 cu. ft., this washer can handle family-sized loads, saving users both time and energy. The machine is designed with efficiency in mind, allowing for fewer trips to the laundromat and reducing water and energy consumption.

The Maytag W10558103A also incorporates advanced technology with its PowerWash Cycle. This innovative cycle features extra cleaning action and a prolonged wash time, ensuring that stubborn stains are eliminated, even in heavily soiled laundry. It provides users with a tailored laundry experience, adapting to the needs of various types of fabric and soil levels.

Durability is a hallmark characteristic of Maytag appliances, and the W10558103A is no exception. Built with commercial-grade components, including a high-performance motor and stainless-steel wash basket, this washing machine is designed to withstand the rigors of daily use. The robust construction not only enhances longevity but also helps in maintaining performance over time.

Moreover, the user-friendly control panel offers a range of wash cycles, including Normal, Heavy Duty, Delicate, and Quick Wash. This versatility allows users to customize their washing experience based on the specific requirements of each load. The intuitive design makes it easy for everyone in the household to operate the machine without difficulty.

In summary, the Maytag W10558103A is a top-tier washing machine that combines powerful cleaning capabilities, ample capacity, and durable construction, making it a valuable addition to any home. With its innovative features and advanced technology, it promises to meet the diverse laundry needs of modern households while delivering reliable performance for years to come.