5.Place the free end of the tubing into a container or sink, and turn on main water supply to flush out tubing until water is clear. Turn off shutoff valve on the water pipe.

NOTE: Always drain the water line before making the final connection to the inlet of the water valve, to avoid possible water valve malfunction.

6.Bend the copper tubing to meet the water line inlet, which is located on the back of the refrigerator cabinet as shown. Leave a coil of copper tubing to allow the refrigerator to be pulled out of the cabinet or away from the wall for service.

Style 2

1.Unplug refrigerator or disconnect power.

2.Remove and discard the short, black plastic part from the end of the water line inlet.

3.Thread the nut onto the end of the tubing. Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

NOTE: To avoid rattling, be sure the copper tubing does not touch the cabinet’s side wall or other parts inside the cabinet.

Connect to Refrigerator

Follow the connection instructions specific to your model.

Style 1

1.Remove plastic cap from water valve inlet port. Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten. Confirm copper tubing is secure by pulling on copper tubing.

2.Create a service loop with the copper tubing. Avoid kinks when coiling the copper tubing. Secure copper tubing to refrigerator cabinet with a “P” clamp.

A

B

C

D

A. Copper tubing

C. Compression nut

B. “P” clamp

D. Compression sleeve

3.Turn on water supply to refrigerator and check for leaks. Correct any leaks.

A

B

C

D

 

A. Household water line

C. Ferrule (purchased)

 

B. Nut (purchased)

 

D. Refrigerator water tubing

4.Install the water supply tube clamp around the water supply line to reduce strain on the coupling.

5.Turn shutoff valve ON.

6.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

7.On some models, the ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your appliance dealer.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

2.Flush the water system. See “Water and Ice Dispensers.”

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill the ice storage bin.

Install

11

Page 11
Image 11
Maytag W10558103A manual Style, Connect to Refrigerator, Complete the Installation

W10558103A specifications

The Maytag W10558103A is a high-quality appliance designed to enhance the efficiency and convenience of everyday laundry tasks. This top-load agitator washing machine stands out in a crowded market thanks to its robust construction, advanced features, and user-friendly interface.

One of the most notable features of the Maytag W10558103A is its powerful Agitator system. This allows for thorough and effective cleaning of clothes, ensuring that dirt and stains are removed with ease. The agitator's design helps to move the laundry around the drum, providing an optimized wash cycle that penetrates even the toughest fabrics. This feature is particularly beneficial for families or individuals with active lifestyles who require their garments to be cleaned thoroughly.

Another highlight is the large capacity of the drum, which provides ample space for bulky items like comforters or multiple loads of laundry at once. With a capacity of 4.7 cu. ft., this washer can handle family-sized loads, saving users both time and energy. The machine is designed with efficiency in mind, allowing for fewer trips to the laundromat and reducing water and energy consumption.

The Maytag W10558103A also incorporates advanced technology with its PowerWash Cycle. This innovative cycle features extra cleaning action and a prolonged wash time, ensuring that stubborn stains are eliminated, even in heavily soiled laundry. It provides users with a tailored laundry experience, adapting to the needs of various types of fabric and soil levels.

Durability is a hallmark characteristic of Maytag appliances, and the W10558103A is no exception. Built with commercial-grade components, including a high-performance motor and stainless-steel wash basket, this washing machine is designed to withstand the rigors of daily use. The robust construction not only enhances longevity but also helps in maintaining performance over time.

Moreover, the user-friendly control panel offers a range of wash cycles, including Normal, Heavy Duty, Delicate, and Quick Wash. This versatility allows users to customize their washing experience based on the specific requirements of each load. The intuitive design makes it easy for everyone in the household to operate the machine without difficulty.

In summary, the Maytag W10558103A is a top-tier washing machine that combines powerful cleaning capabilities, ample capacity, and durable construction, making it a valuable addition to any home. With its innovative features and advanced technology, it promises to meet the diverse laundry needs of modern households while delivering reliable performance for years to come.