FILTERS AND ACCESSORIES

Water Filtration System

 

5. Turn the filter clockwise 90 degrees (¹⁄₄ turn), until it locks into

 

Do not use with water that is microbiologically unsafe or

the housing.

of unknown quality without adequate disinfection before

NOTE: If the filter is not correctly locked into the housing, the

or after the system. Systems certified for cyst reduction

water dispenser will not operate. Water will not flow from the

may be used on disinfected waters that may contain

dispenser.

filterable cysts.

 

 

 

Accessories

Install the Water Filter

1.Locate the accessory packet in the refrigerator and remove the water filter.

2.Take the water filter out of its packaging and remove the cover from the O-rings. Be sure the O-rings are still in place after the cover is removed.

A

B

A.O-ring cover

B.O-rings

3.The water filter compartment is located in the right-hand side of the refrigerator ceiling. Push up on the compartment door to release the catch, then lower the door.

4.Align the arrow on the water filter label with the cutout notch in the filter housing and insert the filter into the housing.

6.While the compartment door is still open, lift the filter up into the compartment. Then, close the filter compartment door completely.

7.Flush the water system. See “Flushing the Water Filter” in the “Water and Ice Dispensers” section.

IMPORTANT: If you do not flush the water system, you may experience dripping and/or decreased flow from the water dispenser.

The Water Filter Status Light

Press WATER FILTER to display the percentage of filter life remaining (from 99% to 0%). Press WATER FILTER again to return to the Normal screen.

The water filter status lights will help you know when to change your water filter.

■ORDER (yellow) - it is almost time to change the water filter.

■REPLACE (red) - Replace the water filter. While you are dispensing water, “Replace” will blink.

NOTE: If a water filter is not installed or is undetected because it is not properly installed (locked into place), “Replace” and “--% remaining” will display on the control panel. Check the water filter.

■RESET the water filter status tracking feature. After you replace the disposable filter with a new filter, closing the filter compartment door will automatically reset the filter status tracking feature. See “Using the Controls.”

NOTE: “Replace” will remain illuminated if a filter is not installed or is installed incorrectly.

14

Page 13 Page 15
Page 14
Image 14
Maytag W10558103A Filters and Accessories, Water Filtration System, Install the Water Filter, Water Filter Status Light
Page 13 Page 15

W10558103A specifications

The Maytag W10558103A is a high-quality appliance designed to enhance the efficiency and convenience of everyday laundry tasks. This top-load agitator washing machine stands out in a crowded market thanks to its robust construction, advanced features, and user-friendly interface.

One of the most notable features of the Maytag W10558103A is its powerful Agitator system. This allows for thorough and effective cleaning of clothes, ensuring that dirt and stains are removed with ease. The agitator's design helps to move the laundry around the drum, providing an optimized wash cycle that penetrates even the toughest fabrics. This feature is particularly beneficial for families or individuals with active lifestyles who require their garments to be cleaned thoroughly.

Another highlight is the large capacity of the drum, which provides ample space for bulky items like comforters or multiple loads of laundry at once. With a capacity of 4.7 cu. ft., this washer can handle family-sized loads, saving users both time and energy. The machine is designed with efficiency in mind, allowing for fewer trips to the laundromat and reducing water and energy consumption.

The Maytag W10558103A also incorporates advanced technology with its PowerWash Cycle. This innovative cycle features extra cleaning action and a prolonged wash time, ensuring that stubborn stains are eliminated, even in heavily soiled laundry. It provides users with a tailored laundry experience, adapting to the needs of various types of fabric and soil levels.

Durability is a hallmark characteristic of Maytag appliances, and the W10558103A is no exception. Built with commercial-grade components, including a high-performance motor and stainless-steel wash basket, this washing machine is designed to withstand the rigors of daily use. The robust construction not only enhances longevity but also helps in maintaining performance over time.

Moreover, the user-friendly control panel offers a range of wash cycles, including Normal, Heavy Duty, Delicate, and Quick Wash. This versatility allows users to customize their washing experience based on the specific requirements of each load. The intuitive design makes it easy for everyone in the household to operate the machine without difficulty.

In summary, the Maytag W10558103A is a top-tier washing machine that combines powerful cleaning capabilities, ample capacity, and durable construction, making it a valuable addition to any home. With its innovative features and advanced technology, it promises to meet the diverse laundry needs of modern households while delivering reliable performance for years to come.
Top Page Image Contents