TROUBLESHOOTING
First try the solutions suggested here or visit our website and reference FAQs
(Frequently Asked Questions) to possibly avoid the cost of a service call.
In the U.S.A., www.maytag.com In Canada, www.maytag.ca
Operation
WARNING
Troubleshooting
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
PROBLEM | POSSIBLE CAUSES | SOLUTIONS |
|
|
|
The refrigerator will | Check electrical supply | Plug the power cord into a grounded 3 prong outlet. |
not operate |
|
|
| Do not use an extension cord. | |
|
| |
|
|
|
|
| Make sure there is power to the outlet. Plug in a lamp to see if the |
|
| outlet is working. |
|
|
|
|
| Reset a tripped circuit breaker. Replace any blown fuses. |
|
| NOTE: If problems continue, contact an electrician. |
|
|
|
| Check controls | Make sure the controls are turned on. See “Using the Control(s).” |
|
|
|
| New installation | Allow 24 hours following installation for the refrigerator to cool |
|
| completely. |
|
| NOTE: Adjusting the temperature controls to the coldest setting will |
|
| not cool either compartment more quickly. |
|
|
|
| Refrigerator control is in Showroom | If the refrigerator is in Showroom mode, cooling is turned off and |
| mode (on some models) | “Showroom” will be illuminated on the control panel. See “Using the |
|
| Control(s)” for more information. |
28
