Lexmark 920 manual Installing and removing options, Aligning the optional finisher

Installing and removing options

2Loosen the guide rail thumbscrews.

3Rotate the adjustment knobs as needed to align the holes in the finisher with the pins. To raise the finisher, rotate the adjustment knobs clockwise.

To lower the finisher, rotate the adjustment knobs counterclockwise.

4Roll the finisher toward the printer until the finisher locks to the docking plate pins. You hear a click when the finisher locks into position.

If the pins go into the holes but the finisher did not lock to the pins, see Aligning the sides of the finisher. Otherwise, go to Aligning the top of the finisher.

Aligning the optional finisher

39