Lexmark 920 manual Installing an option card, Installing and removing options

Installing and removing options

Installing an option card

Your printer has one expansion card slot that supports a number of option cards. The following table describes their function.

Card	Function
MarkNet N8000 series internal print	Adds an Ethernet, Token-Ring, or Fiber port to connect your printer to a
server	network.
Serial/Parallel 1284-C Interface Card	Adds an RS-232C serial and 1284-C parallel interface port.
Coax/Twinax Adapter Card for SCS	Adds a coaxial/twinaxial network port.
802.11g Wireless Print Adapter	Connects to an optional MarkNet N8000 series internal print server to add
	US or international 802.11g wireless printing capability.

Note: The network models ship with an Ethernet print server already installed.

You need a small Phillips screwdriver to install these options.

1Remove the system board access cover (see Removing the system board access cover).

2Remove the screw from the metal plate that covers the connector slot, and then lift the plate off.

Save the screw.

Warning: Option cards are easily damaged by static electricity. Touch something metal, such as the printer frame, before you touch an option card.

3Unpack the option card. Save the packing materials.

Installing an option card

32