Lexmark 920 manual Adjusting the finisher wheels, Installing and removing options

Installing and removing options

4Roll the finisher toward the printer until the finisher locks to the docking pins. You hear a click when the finisher locks into position.

Adjusting the finisher wheels

Adjust the wheels on the end of the finisher so the stand will remain aligned when moved. To adjust and lock the wheels:

1Rotate the left and right upper adjustment knobs on the rear wheels until the wheels touch the floor. To lower the wheels, rotate the adjustment knobs clockwise.

2Turn the wheels until the locking knobs are aligned with the finisher base.

3Rotate the locking knobs counterclockwise until they contact the finisher base.

Adjusting the finisher wheels

43