Lexmark 920 manual Setting security using the Embedded Web Server EWS, Setting the system password

Administrative support

5Press until Disable appears, and then press .

Contents will be lost. Continue? appears.

6Press until Yes appears, and then press . The Encrypting Disk progress bar appears.

7When disk encryption has finished, press .

8Press until Exit Config Menu appears, and then press .

Setting security using the Embedded Web Server (EWS)

You can enhance the security of network communications and device configuration by using the advanced security options. These features are available through the Web page of the device.

Setting the system password

Setting the system password protects configuration of the Embedded Web Server. A system password is also required for Secure mode and confidential communication with MVP.

To set the system password:

1Open your Web browser. In the address line, enter the IP address of the printer you want to configure using the format: http: //ip_address/.

2Click Configuration.

3Under Other Settings, click Security.

4Click Create Password, if one has not been set previously. If a password has already been set, click Change or Remove Password.

Using the secure Embedded Web Server

The SSL (Secure Sockets Layer) allows for secure connections to the Web server within the print device. You can connect to the Embedded Web Server more securely by connecting to the SSL port instead of the default HTTP port. The SSL port connection will encrypt all Web server network communications between the PC and the printer. To connect to the SSL port:

Open your Web browser. In the address line, enter the IP address of the printer you want to configure using the format: https: //ip_address/.

Supporting SNMPv3 (Simple Network Management Protocol version 3)

SNMPv3 protocol allows for encrypted and authenticated network communications. It also lets the administrator select a desired level of security. Prior to use, at least one user name and password must be established from the settings page. To configure for SNMPv3 through the Embedded Web Server of the printer:

1Open your Web browser. In the address line, enter the IP address of the printer you want to configure using the format: http://ip_address/.

2Click Configuration.

3Under Other Settings, click Network/Ports.

4Click SNMP.

SNMPv3 authentication and encryption has three levels of support:

Setting security using the Embedded Web Server (EWS)

133