Lexmark 920 manual Installing height adjustment spacers, Installing and removing options

Installing and removing options

Installing height adjustment spacers

If the pins on the high capacity feeder do not align with the holes in the docking frame, adjust the height of the feeder.

You can either remove the factory installed spacer or add two spacers between each caster and the bottom of the high capacity feeder.

Use the following steps to add or remove spacers.

1Determine the height difference between high capacity feeder alignment pins and the docking frame.

2Place the high capacity feeder on the floor or adequate work surface.

3Remove the four screws securing one of the casters to the high capacity feeder.

4Add or remove spacers. To add spacers:

a Insert the four screws through the caster. b Place the spacers on the screws.

Aligning the optional high capacity feeder

35