KEY TO MAIN COMPONENTS OF THE APPLIANCE
1.Cord with plug
2.Motor section
3.On/off button
4.Base
5.Cutter (at the bottom of the glass jug)
6.Glass jug with measuring scales
7.Lid
8.Groove
9.Stopper (and measuring cup)
10.Spout
11.Spindle
PRIOR TO FIRST USE
•Read through the safety instructions carefully.
•Before using for the first time, or after prolonged storage without use, wash any parts that will come into contact with food.
•Place the motor section (2) on a flat surface, e.g. a kitchen counter, and make sure it is standing firmly on the three rubber legs.
•Fit the glass jug (6) onto the spindle
(11) of the motor section, so that the bottom (4) fits onto the motor section. o Ensure the two parts fit correctly to
avoid any gaps between the bottom and the motor section.
USE
1.Check that the on/off button (3) is at the “OFF” position (off).
2.Remove the lid (7) from the appliance and add food to the jug.
o NOTE: Never fill the glass jug above the mark “1250 ml/1.25 l” on the jug.
3.Replace the lid securely so that it covers the spout (10). Insert the stopper (9) in the lid and turn it 90 degrees clockwise to lock it into position.
4.Insert the plug (1) in the mains socket and switch on the power.
5.Place a hand on top of the lid to hold it in place.
6.Switch on the appliance by switching the on/off button to one of the following positions:
o “I” (lowest speed, ideal for liquids) o “II” (highest speed, ideal for solid
foods)
o “PULSE” (the appliance is only running as long as the on/off button is kept in this position).
7.Switch off the appliance by turning the on/off button to the “OFF” position.
Then remove the plug from the socket.
8.Wait, until the cutter (5) has stopped moving, before removing the lid from the appliance.
NOTE: Never use the appliance for more than 3 minutes at a time. If the appliance has been running for 3 minutes, leave it to cool down before you use it again.
TIP:
•The appliance is suitable for crushing ice. Stop the procedure regularly so you can see, when the ice is of the required texture.
•The stopper has measuring lines, enabling it to be used as a measuring cup.
•The glass jug has different measuring scales – both litres and millilitres as well as the US measures ounces and cups.
CLEANING AND STORAGE
•Remove plug from the mains socket, and allow the appliance to cool down before cleaning it.
•The appliance must not be submerged in any form of liquid.
•Clean the appliance by wiping it with a damp cloth. A little detergent can be added if the appliance is heavily soiled.
•Never use a scouring pad, steel wool or any form of strong solvents or abrasive cleaning agents to clean the appliance, as those may damage the outside surfaces of the appliance.
•Be careful not to touch the sharp cutter blades at the bottom of the glass jug!
•The lid and stopper can be washed by hand or in a dishwasher. The jug and the motor section are NOT dishwasher- proof.
•Ensure the appliance is clean and dry before storing.
•The appliance contains sharp parts - keep out of the reach of children.
15
