Franke Consumer Products FCH 367 Chimney assembly, Electrical Connection, Upper exhaust Chimney

ELECTRICAL CONNECTION

• Remove the cover from the Field Wiring Compartment with a

phillips screwdriver.Green

Ground

• Feed the Power Supply Cable through the electrical knockout. screw Connect the Power Supply Cable to the range- hood cable. At- tach the Power Supply Cable grounding lead to the green screw provided. Attach the White lead of the power supply to the White lead of the rangehood with a twist-on type wire connec- tor. Attach the Black lead of the power supply to the Black lead of the rangehood with a twist-on type wire connector.

• Replace the cover.

Chimney assembly

Upper exhaust Chimney
• Slightly widen the two sides of the upper flue and hook them	2.1
behind the brackets 7.2.1, making sure that they are well	2

Ground wire

Power supply cable

7.2.1

12c

seated.

• Secure the sides to the brackets using the 4 screws 12c sup- plied.

• Make sure that the outlet of the extensions pieces is aligned with the chimney outlets.

Lower exhaust Chimney

2.2

12c

12c

•Slightly widen the two sides of the flue and hook them be- tween the upper flue and the wall, making sure that they are well seated.

•Fix the lower part laterally to the hood body using the 2 screws 12c supplied.

EN	1
	10