ASSEMBLYcont.
"x
,t On the Bowl Cover are the load chute, food chule lid, and movable loop, which serves as a housing for the food pusher Also included is the shaft conlainlng the spring mechanism that controls the slide button used to lock the food chute tid into place These are part of the Bowl Cover assembly
5Place the Bowl Cover Assembly onto the Bowl Align the arrow on the Cover and the
unlock Icon on the Bowl (see Fig- 2 and 2a) Turn the Cover counterclockw}sa towards the center front until it clicks
NOTE: There is only one position for the Bowl Cover to lock onto Bowl The unit will no!
operate if the Bowl Cover does not lock onto the Bowl, o[ ff the Food Chute Lid does not lalch onto the Food Chute
6Make sure the food chute lid is securely latched inlo place.
7To open the Food Chute Lid pull the Slide Release Button out Lifl the Food Chute Lid and Movable Loop (see Fig 3 and 3a) up and back to open
Fig,3a
/_Flgo3
B. When the food pusher is not being used to feed items down through Ihe food chute, It should be locked into place tn the movable loop This Is usually the case when using blades down in the bowllnstead of discs at the top of the bowl.
When locked together, the food pusher and movable loop can also act as one larger food pusher To lock the food pusher into the movable loop. slide the tab located on the food
pusher into the slot on Ihe dm of lhe movabte loop 5
