CONTROLS
When the processor is plugged In, the green Power iight illuminates 1o show that the unit is connected to a power source When the base, bowl and cover assembly is eorreelty connected and locked into place, the OFF light is also illuminated green to show that the unit is ready to operate if tile OFF light is not green, the bowl and cover are not locked logether corroclly
PULSE: When the Control Knob Switch is turned counterclockwise to PULSE and heId, the green PULSE ligh_ comes on and the Food Processor operates As soon as you let go of the Switch the Processor shuts off and the Switch returns the OFF position Use PULSE for shmt processing tasks, such as chopping nuls, raw meats or vegetabiee This allows you much greater control of the consistency of what you are processing.
ON: When the Control Knob Switch is turned clockwise to ON, the green ON light comes on and the unit will run continuously This is good for _esstender toed and items that take a while fonger to process When you have finished processing, turn the conlrot knob switch to OFF
CHOPPING: | .... _ | Fig, 4 | ||
1 | Lock the Bowl onlo the Base as described | |||
in Assembly |
| |||
2 | Place the Chopping Blade onto the Center | Post (see Fig. 4) |
| |
CAUTJO N; Blades are sharp, Handte carefully, 1
3Piece food to be chopped into Bowl Refer to Food Gutde to prepare food for chopping
4Lock Bowf Cover Assembly onto Bowl, as described in Assembly
5Lock the Food Pusher into the Movable Loop by totaling counterclockwise until the food pusher'stab is under slot in the movabte loop'stid, then lock feed chule tid irttothe spdng operated s}ide button by pressing down firmly
6The Food Processor should be in the OFF position. Plug the
cord into an electric outlet. The Power light itluminatas green 1o show it is connected Io a poweJ'source, and the OFF button Illuminates green if base, bowl, and cover assembly are al_locked inlo place
7Turn the knob to ON to run constantly, or for better control
over consistency, turn and held knob on PULSE
When finished processing;
•tl Pulsing, release Knob Switch and unit automatically stops.
•If you turned processor to ON, turn Control Knob Switch to OFF lo stop ,, Allow the chopping biacie to stop rotating
