For your safety

Care and Cleaning

Wine Reserve

Unplug the wine reserve before cleaning. If the unit is in a built-in location, remove power at the circuit breaker.

Cleaning the inside

Unplug the wine reserve before cleaning. If the unit is in a built-in location, remove power at the circuit breaker. Use a slightly damp cloth or sponge when cleaning around switches, lights or controls.

Use warm water and baking soda solution— about a tablespoon (15 ml) of baking soda to a quart (1 liter) of water. This both cleans and neutralizes odors. Thoroughly rinse and wipe dry.

Other parts of the wine reserve center unit—including the door gaskets and full extension drawers—can be cleaned the same way.

Drain hole

Periodically check the drain hole and channel for any debris. If the drain is blocked, condensation will not drain properly.

To check and clean the drain hole, remove the third and fourth drawers

(see instructions on Removing full extension drawers). Sweep a damp cloth along the channel in the back of the wine reserve. Use a finger to sweep away any debris from the drain hole.

Drain hole

Appearance may vary

Cleaning the outside

The exterior surfaces can be washed with mild soap and water.

Rinse thoroughly with clear water. Never use abrasive scouring powders.

Do not use scouring pads, powdered cleaners, bleach or cleaners containing bleach because these products can scratch and damage the finish.

Warranty does not cover damage due to improper cleaning methods.

Glass door

Use a glass cleaner or mild soap and water and a soft cloth to clean the glass door. Do not use any abrasive powders.

Avoid cleaning cold glass with hot water because the extreme temperature difference may cause it to break. Rough handling of tempered glass can cause it to shatter.

Do not place magnets on or near the

glass door. Magnets may cause permanent damage to the door.

Door gasket

The vinyl gasket may be cleaned with mild

After cleaning the door gasket, apply a thin

soap and water, a baking soda solution or

layer of paraffin wax or petroleum jelly to the

a mild scouring powder. Rinse well.

door gasket at the hinge side. This helps keep

 

the gasket from sticking and bending out of

shape.

11

 

Page 10 Page 12
Page 11
Image 11
GE ZDWT240 owner manual For your safety, Cleaning the inside, Drain hole, Cleaning the outside, Glass door, Door gasket
Page 10 Page 12

ZDWT240 specifications

The GE ZDWT240 is an advanced water treatment solution designed to meet the growing demands of industrial applications. This innovative system integrates sophisticated technologies to deliver efficient and reliable water purification, making it an essential asset for industries seeking to optimize water usage and improve overall operational productivity.

One of the main features of the GE ZDWT240 is its modular design, which allows for customized configurations based on specific operational requirements. This flexibility ensures that businesses can adopt a water treatment system that perfectly aligns with their water quality needs and processing demands. The modularity also facilitates future scalability, enabling organizations to expand their water treatment capacity as they grow.

Incorporating state-of-the-art membrane technology, the ZDWT240 employs reverse osmosis (RO) as a core process. Reverse osmosis is recognized for its ability to remove dissolved solids, ions, and contaminants from water, producing high-quality effluent suitable for a variety of industrial applications. This technology is particularly effective in reducing the concentration of pollutants, ensuring compliance with stringent environmental regulations.

Another significant characteristic of the ZDWT240 is its energy-efficient operation. The system is designed to minimize energy consumption while maintaining optimal performance levels. By utilizing advanced energy recovery systems, the ZDWT240 can significantly reduce operational costs, making it a cost-effective solution for industrial water treatment.

Furthermore, the GE ZDWT240 is equipped with sophisticated monitoring and control systems that provide real-time data on water quality and system performance. This feature enhances operational efficiency by allowing operators to make informed decisions and promptly address any potential issues before they escalate into larger problems.

Maintenance is a crucial aspect of any water treatment system, and the ZDWT240 is designed with ease of maintenance in mind. Its user-friendly interface and accessible components simplify routine checks and servicing, ensuring that the system operates at peak efficiency with minimal downtime.

In conclusion, the GE ZDWT240 represents a cutting-edge solution for industrial water treatment. Its modular design, advanced reverse osmosis technology, energy efficiency, and robust monitoring capabilities make it an indispensable tool for industries aiming to enhance water management practices while ensuring compliance and sustainability. As water scarcity becomes an increasing concern worldwide, systems like the ZDWT240 play a vital role in promoting responsible water utilization and environmental stewardship.
Top Page Image Contents