GE ZDWT240 owner manual Interior lighting and glass activation, Removing full extension drawers

Models: ZDWT240

1 20
Download 20 pages 6.39 Kb
Page 9
Image 9

Controls and Features

Wine Reserve

Interior lighting and glass activation

The interior light makes it easy to view your wine labels and enhances the display of your collection. The privacy glass allows you to view your wine with a simple press of a button, without opening the door. These two features work jointly to display your wine.

Normal operation

When the door is opened, the light will come on and the door will become clear.

Special features

The light and glass activation button, located at the top of the handle, will switch the glass from opaque to clear and will, at the same time, turn on the light. The light will stay on and the glass will remain clear for one hour from the last time the button was pressed. To turn the light off and make the glass opaque, press the button again. The opaque setting conceals the contents from view. The light will come on only when the door is opened

or the button is pressed. If you choose to activate the light and door while the door is open, you may notice that the word ON is displayed. If you press the light button a second time, while the door is open the word OFF will be displayed.

For best viewing, do not store a bottle on the top shelf directly under the light. Remember to turn off the light when it is no longer needed.

Removing full extension drawers

All of the full extension drawers pull out so bottles can be conveniently added or removed.

Any of the full extension drawers can be removed to store larger bottles.

To remove:

1.Pull the full extension drawer out to the STOP position.

Tab (push tab down on right drawer guide, pull tab up on left drawer guide)

Appearance may vary

2.Push the tab on right drawer guide down while pulling the tab on left guide up, and pull the drawer out.

To replace:

1.Push the drawer slide arm back into the unit.

2.Pull the small slide sub-assembly completely forward.

3.Insert the sides of the drawer back into the guides.

4.Push until the tabs lock into place.

Sub-assemblySub-assembly

To replace, push drawer slide

Pull small slide sub-assembly

arm back into unit

completely forward

NOTE: Make sure the tabs on the full extension drawer guides are fully engaged before loading any bottles. Pull the drawers out all the way to the STOP position and push back in several times to make sure locking tabs are properly engaged.

9

Page 9
Image 9
GE ZDWT240 owner manual Interior lighting and glass activation, Removing full extension drawers