IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING

Countertop Microwave Oven

Grounding Instructions

WARNING!

Improper use of the grounding plug can result in a risk of electric shock.

Ensure proper ground exists before use.

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current.

If the outlet is a standard 2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

Do not under any circumstances cut or remove the third (ground) prong from the power cord.

We do not recommend using an extension cord with this appliance. If the power cord is too short, have a qualified electrician or service

This appliance is equipped with a power cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

Consult a qualified electrician or service technician if the GROUNDING INSTRUCTIONS are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

technician install an outlet near the appliance. (See EXTENSION CORDS section.)

For best operation, plug this appliance into its own electrical outlet to prevent flickering of lights, blowing of fuse or tripping of circuit breaker.

Adapter

Usage situations where appliance’s power cord will be disconnected infrequently.

CAUTION: Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is

Plugs

(Adapter plugs not permitted in Canada)

Align large prongs/slots

TEMPORARY

METHOD

Ensure proper ground and firm connection before use.

metal, and not insulated, and the wall receptacle is grounded through the house wiring.

You should have the circuit checked by a qualified electrician to make sure the receptacle is properly grounded.

When disconnecting the power cord from the adapter, always hold the adapter with one hand. If this is not done, the adapter ground terminal is very likely to break with repeated use. Should

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug. However, if you still elect to use an adapter, where local codes permit, a TEMPORARY CONNECTION may be made to a properly grounded wall receptacle by the use of a UL listed adapter which is available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall receptacle to provide proper polarity in the connection of the power cord.

this happen, DO NOT USE the appliance until a proper ground has again been established.

Usage situations where appliance’s power cord will be disconnected frequently.

Do not use an adapter plug in these situations because frequent disconnection of the power cord places undue strain on the adapter and leads to eventual failure of the adapter ground terminal. You should have the 2-prong wall receptacle replaced with a 3-prong (grounding) receptacle by a qualified electrician before using the appliance.

SAVE THESE INSTRUCTIONS

10

Page 9 Page 11
Page 10
Image 10
GE ZEM115 owner manual Adapter
Page 9 Page 11

ZEM115 specifications

The GE ZEM115 is an innovative electric meter designed for residential and commercial applications, specifically engineered to provide advanced metering functionalities and enhanced performance. As a part of GE's next-generation metering solutions, the ZEM115 represents a significant step forward in energy management technology.

One of the standout features of the GE ZEM115 is its ability to communicate wirelessly using a robust communication protocol. This enables utilities to gather real-time data on energy consumption, facilitating better demand response and load management strategies. The meter’s advanced connectivity allows for remote monitoring, ensuring that utilities can quickly identify and resolve outages or maintenance issues without the need for a physical site visit.

In terms of technology, the GE ZEM115 is equipped with a state-of-the-art microprocessor that supports various applications. This processor enhances the meter's ability to perform complex calculations and maintain high levels of accuracy in tracking energy usage. Additionally, the ZEM115 features a built-in data logging capability, which records vital usage metrics over time, aiding in trend analysis and consumption forecasting.

The design of the GE ZEM115 focuses on durability and ease of installation. Its compact form factor and lightweight design reduce the overall installation time and costs. The meter is also constructed from high-quality materials, ensuring longevity and resistance to environmental challenges. An intuitive user interface enhances its usability, allowing both consumers and technicians to navigate through the various functionalities with ease.

Moreover, the GE ZEM115 supports advanced security features to protect the integrity of the data collected. Through encrypted communications and strict access controls, the meter ensures that sensitive information remains secure from unauthorized access.

Another critical characteristic of the ZEM115 is its flexibility regarding integration with third-party systems. This interoperability opens up possibilities for utilities to implement comprehensive energy management solutions tailored to their specific needs.

In summary, the GE ZEM115 electric meter embodies a blend of cutting-edge technology and practical design. With features such as wireless communication, advanced microprocessor capabilities, robust security measures, and ease of installation, it stands as a reliable solution for modern energy metering needs. Its adaptability to various utility environments further solidifies its position as a leading choice in the energy management sector.
Top Page Image Contents