ZET1SM
GE Monogram® 30” Built-In Single Oven
Dimensions and Installation Information (in inches)
KW Rating |
|
240V | 4.3 |
|
|
208V | 3.9 |
Breaker Size |
|
240V | 20 Amps |
|
|
208V | 20 Amps |
Installation Flexibility
These ovens may be installed below a countertop and beneath approved cooktops. They may also be installed in combination with an Advantium oven and a warming drawer. They may also be installed side by side. This oven is not approved for stackable, one over another installations.
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
Min. 
Locate Junction Box 22"
Above Cutout Floor, Within 5"
of Right Rear Wall
Recessed | |||
|
| ||
| Depth |
| |
| 30" |
|
28-1/4"
23-1/4" 29-3/4" Recessed 
Depth
Side by Side Installations
Install two wall ovens in separate cutouts. Allow 2" (5.1 cm) min. between cutouts.
Per Advantium or
Microwave Oven
Requirement
Per Warming Drawer Requirement
2 (5.1 cm) Min.
2 (5.1 cm) Min.
Note: Install the oven only with specific models listed on the label located on top of the oven.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
The solid bottom or runners must be level with the bottom of the cutout, or the bottom trim may not install correctly and could interfere with the door opening. If the cabinet does not have a solid bottom, two braces or runners must be installed level with the bottom of the cutout to support the weight of the oven. The runners and braces must support 200 lbs. (90 kg).
Listed by
Underwriters
Laboratories
Specification Created 4/07 | 130188 |
