Sharp LC-60E88UN, TINS-E580WJZZ operation manual Troubleshooting Error Message, E202, E203

Appendix

Problem	Possible Solution
• No picture	• Is connection to other components correct? Pages 11 to 15 and 36

•Is correct input signal source selected after connection? Page 30

•Is the correct input selected? Pages 11 and 17

•Is "On" selected in "Audio Only"? Page 30

•If the PC image is not displayed, check the following:

-When connecting a laptop PC to the TV, check that display output mode of the PC is set to external monitor.

-Check the resolution setting on the PC. Is a non-compatible signal being input?

Page 41

• Picture quality of HD programs is	• To enjoy HD images from external equipment, you are required to set up HDMI
poor.	connection or component connection.
	• If the program content is not of HD quality, HD images cannot be displayed. Check
	that the program you are viewing provides HD images.
	• The HD cable/satellite set-top box may need to be confi gured to output HD images
	via cable/satellite.
	• The cable/satellite broadcast may not support a signal resolution of 1080p.
• The TV sometimes makes a	• This is not a malfunction. This happens when the cabinet slightly expands and
cracking sound.	contracts according to change in temperature. This does not affect the TV's
	performance.

Troubleshooting - Error Message

The example of an error message	Error code	Possible Solution
displayed on a screen
• Failed to receive broadcast.	E202	• Check the antenna cable. Check that the antenna is correctly
		setup.
• No broadcast now.	E203	• Check the broadcast time in the program guide.
• An incompatible audio signal has	—	• This message is displayed when an audio format other than
been received. Change the output		PCM is input. (Dolby Digital and DTS audio formats are not
device audio settings to PCM.		supported.)
		- Set the audio output format of connected external HDMI
		equipment to PCM.
		- Refer to the operation manual of the external equipment for
		setting details.

Cautions regarding use in high and low temperature environments

•When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

•Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a

heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction. Storage temperature: f4°F to e140°F (f20°C to e60°C)

45