GE ZGG542NCPSS dimensions Outdoor Grills, Dimensions and Installation Information in inches

ZGG542NCPSS - Natural Gas Free-standing Outdoor Grill ZGG542LCPSS - LP Gas Free-standing Outdoor Grill

Dimensions and Installation Information (in inches)

12" Min. to Combustibles 4" Min. Clearance for Lid to Non-Combustibles

*12" Side Burner

15-1/2" (both sides)

51"

27"	*27-1/2" Side
	Burner and Shelf
	53-7/8"

54" Outdoor Grills

These grills are one-piece welded construction and portable.

• Use the grill in a location that is level and stable.

The minimum clearances to combustibles must be observed at all times:

•Allow at least 12" minimum clearance at the back of the grill when the exhaust is directed to a window or surface that is difficult to clean. Allow at least 4" clearance to non-combustible surfaces behind the grill to allow the hood lid to open.

•Allow 12" minimum clearance on both sides and the back of the grill to adjacent vertical combustible construction.

•These gas grills cannot be used below any type of overhead construction.

•These grills are designed for outdoor use only. Do not locate the cooktop in a building, garage or other enclosed or semi-enclosed area.

•Locate the backside of the grill away from prevailing winds and avoid cooking in windy conditions.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Specification Created 10/08 170136