Manuals / GE / Kitchen Appliance / Cooktop

GE ZGU3650 Install Pressure Regulator, Connect electrical, Assemble burners, check ignition

Models: ZGU3650

1 8
Download 8 pages 18.04 Kb
Page 7
Image 7

Installation

Gas Updraft Cooktop

Step2

Install

Pressure

Regulator

•Install the supplied pressure regulator and nipple in the gas line as close to the cooktop inlet as possible. Allowances for ventilation ducting may be necessary.

–Make sure the regulator is installed in the right direction.

•Install a manual shut-off valve in the gas line in an easily accessible location.

Note: Instead of using solid piping to connect to pressure regulator, an approved flexible metal appliance connector may be used between the pipe stub and the shut-off valve and the pressure regulator, if local codes permit.

–Appropriate flare nuts and adapters are required at each end of the flexible connector.

•Turn on the gas. Check for leaks using a liquid leak detector at all joints in the system (the pressure test nipple is adjacent to the gas inlet pipe on the rear right hand side of the cooktop bottom.

CAUTION Do not use a flame to check for gas leaks.

PRUDENCE IL NE FAUT PAS UTILISER DE FLAMME POUR VÉRIFIER S’IL Y A DES FUITES.

Regulator

Solid Piping or Flexible Connector

Shut-Off

Valve

Pipe Stub

IMPORTANT: Disconnect the cooktop and the individual shut-off valve from the gas supply piping system during any pressure testing of that system at test pressures greater than 1/2 psig. Isolate the cooktop from the gas supply piping system by closing the individual manual shut-off valve to the cooktop during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig.

Step3

Connect electrical

•Plug power cord into properly grounded receptacle.

Step4

Assemble burners, check ignition

•Assemble burner as shown. Check to be sure that burner heads are securely seated and caps are positioned as shown.

Burner Grate

Burner Cap

Burner Head

Burner Bowl

Make sure slot in burner head

 

is positioned over electrode

Electrode

 

 

Medium Head

 

 

And Cap

 

Medium Head

 

Small Head

And Cap

 

And Cap

Medium Head

 

Large Head

And Cap

Front

And Cap

 

 

•Check for proper ignition:

–Push in one control knob and turn 90° to HIGH position.

–The igniter will spark and the burner will light; the igniter will cease sparking when the burner is lit.

–First test may require some time, while air is flushed out of the gas line.

–Turn knob to OFF.

–Repeat the procedure for each burner.

7

 

Page 6 Page 8
Page 7
Image 7
GE ZGU3650 installation instructions Install Pressure Regulator, Connect electrical, Assemble burners, check ignition
Page 6 Page 8

ZGU3650 specifications

The GE ZGU3650 is a versatile and advanced generator set that has gained significant recognition in the energy sector. Designed to deliver reliable power for various applications, the ZGU3650 is particularly notable for its robust performance, efficiency, and cutting-edge technology.

One of the main features of the GE ZGU3650 is its high power output capability. With a capacity of up to 3650 kVA, it is designed to cater to large industrial and commercial requirements, making it ideal for critical infrastructure projects, data centers, and manufacturing facilities. This generator set can operate on various fuel types, including diesel and natural gas, providing flexibility and adaptability to different operational environments.

The ZGU3650 is equipped with advanced control systems that enhance its efficiency and operational reliability. It incorporates GE's next-generation digital control technology, allowing for real-time monitoring and control of the generator's performance. This feature ensures optimal fuel consumption while maximizing output, which not only reduces operational costs but also minimizes environmental impact.

Another standout characteristic of the ZGU3650 is its sound-attenuated enclosure. This design significantly lowers noise levels, making it suitable for use in urban or noise-sensitive environments. The generator also boasts a robust cooling system that maintains optimal operating temperatures, ensuring longevity and reducing maintenance costs.

The generator set is designed with safety as a paramount concern. It includes integrated protection features such as overload protection, short circuit protection, and fault monitoring. These systems work in conjunction to safeguard both the generator and connected load, enhancing reliability during operation.

In addition to these features, the GE ZGU3650 is built for ease of serviceability. The layout of components is designed to facilitate maintenance, with easy access to vital parts. This design consideration helps to minimize downtime, ensuring that equipment remains operational when needed.

With its combination of high power output, advanced control systems, noise reduction, and safety features, the GE ZGU3650 stands out as a leading choice for organizations that require dependable and efficient power solutions. Whether for emergency backup, prime power, or continuous operation, this generator set delivers performance that meets the demands of various industries while prioritizing sustainability and operational efficiency.