GE dimensions ZGU48N6RWSS-48 Professional Gas Cooktop, Advance Planning

Monogram.™

ZGU48N6RWSS—48" Professional Gas Cooktop

Dimensions and Specifications (in inches)

	48" Wide Hood
	30" Min.	13" Max.	36" Min. to
			Combustible
	36" Max.	12" Min. to
18" Min.			Material From
		Combustible
			Cooking
		Material
			Surface
2"	17"	Each Side
7/8"	46-1/8"	22-3/4" Min.
	Cooking Surface
2-1/2"	Electric/Gas
	Supply
8"

Advance Planning:

Refer to dimensional drawings for appropriate placement and necessary clearances when planning the installation.

• Cabinetry cannot be installed directly above

the cooktop.

• This cooktop requires the installation of a vent

hood, 30" to 36" above the surface.

–The vent hood must be at least 24" deep.

–The vent hood must be the same width as

the cooktop.

–The vent hood blower should provide at least

800 CFM and up to 1200 CFM.

–Choose a vent hood with 800CFM for best

performance when operating the grill.

• Working areas adjacent to the range should

have 18" minimum clearance between

countertop and cabinet bottom.

• Clearance between cooktop and side wall or

combustible material must be at least 12" on

each side.

• This cooktop requires 8" free space below

the countertop.

			26-5/8"
2-1/2"	10"
				High
21-1/4"
				Shelf
12"		Low Back

36" Min.

to Combustibles

12" Min. to Combustibles

Without Backguard

36" Min.

to Combustibles

Island Trim

• If the cooktop is installed in an island:

–Allow 12" min. clearance at the back to

combustible materials.

–Allow 36" min. above the cooking surface to

combustible materials.

• Installation must conform with local codes. In

the absence of local codes, the gas cooktop

must comply with the National Fuel Gas Code,

ANSI Z223.1, latest edition.

A.G.A. approved

For answers to your Monogram,® GE Profile,™ GE, Hotpoint and RCA appliance questions, call GE Answer Center® service, 800.626.2000.

UL	Listed by
	Underwriters
R	Laboratories
Revised 7/97