Installation Instructions
[STEP 9A] INSTALL OVERLAY PANELS Right hand models shown. Use the same instructions
for left hm_d models.
DoorTrim
Handle
Trim
Refrigerator
Door
Move
Forward
For3/4"
Panel
-Use Front Holes to Secure Handle
UseRearHoles to SecureTrim
Suppliedhandleshown in the overlaypanelposition.
Install door and drawer panels:
•Open door to 90 °. Relnove the 4 Phillips head screws ti'om the door handle.
•Remove handle. P,emin all screws.
•Remove 4 screws holding trim, lilt off trim. Retain screws.
•Slide overlay panel into the door trim.
Custom handles
If you are using custom handles, the handle must be
properly secm'ed to the panel betore sliding the panel into the trim,
• The cabinet manufacturer will supply the custom handle and hardware.
• Secm'e the door/drawer trim using both the FRONT
and I/EAR screw holes. Discard supplied handle.
•There are two sets of holes in the handle side trim.
Replace handle side trim by installing the original screws in the REAR screw holes.
•Secure the handle to the door using the FRONT screw holes.
•Follow the same procedures to install the drawer panel.
15
