ZIR360NX
GE Monogram® 36"
Dimensions and Installation Information
All-Refrigerator, All-Freezer 3/4" Overlay Panel
Overlay panels may be installed on trimmed units.
The overlay panel must be secured to a 1/4" thick backer panel which slides into the trim. A 0.10" thick spacer panel must be placed between the custom and backer panel.
Assemble overlay panels with glue and screws.
•Center spacer panel on the backer panel left to right and top to bottom. Secure the panels with glue.
•Center the spacer/backer panel on the overlay panel and secure with glue and screws. Screws must be countersunk into the backer panel.
Note:
Door/
Drawer
1/4"
Backer
Panel
Overlay
Panel
.10"
Spacer
Optional Accessories
Order these accessories from your Monogram supplier.
ZKHPSS2, Professional Handle Kit
Professional stainless steel tubular handle designed to fit 3/4" overlay panels. Note: Kit includes one Professional handle, 31" long.
ZKHSS2 Tubular Handle Kit
Monogram stainless steel tubular handle designed to fit 3/4" overlay panels. Note: Kit includes two tubular handles,
ZUG2 Unified Grille Panel Kit
For
ZPBS360, Black and ZPSS360 Stainless Steel Accessory Panel Kits These accessory panels are cut to size and ready to install.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
Overlay Panel
Spacer Panel
Backer Panel
Listed by
Underwriters
Laboratories
Specification Created 6/08 | 110161 |