GE dimensions ZIR36NM - GE Monogram 36 Built-In All-Refrigerator, Monogram.“

Monogram.“

ZIR36NM – GE Monogram 36" Built-In All-Refrigerator

Enclosure Cutout and Product Dimensions (in inches)

10-3/4" Max.	35" Case	ZIR36NMRH, Refrigerator
10" Min.
		Handle on the left side, the door swings left to right.
24-3/4"	36" Overall

26-3/4"

73-1/2"

4"

84-1/2" Max.

83-1/2" Min.

ZIR36NMLH, Refrigerator

Handle on the right side, the door swings right to left.

Caution

Refrigerators are much heavier at the top than at the bottom – be extra careful when moving.

•To achieve a flush fit, the finished cutout width must be at least 36" wide.

•In a semi-flush installation, the finished cutout must be 35-1/2".

•The electrical and water locations must be located as shown for either type of installation.

35"	24-3/4"
Case	Case
Width	Depth
	84*

26-1/4"	36"
Including	Frame to Frame
Handle

*Shipped at 84" installation height. Can be adjusted to 83-1/2" or 84-1/2" with Grille Panel Kits.

Specification Revised 4/05 110160

				*Finished Width
				2-1/2			Electrical		Wall View
						6	Area
	5
84-1/2" max		24 3/4" Total							75" From Floor
83-1/2" min		Depth							to Bottom
Finished									of Electrical
Opening									Area
	5				Water Supply			5	3-1/2
			3-1/2

*36" for a flush installation.

35-1/2" Min. for a semi-flush installation.

Note: Additional cutout width may be required when side panels are used. Add side panel thickness to the finished cutout to calculate rough-in width. See installation examples.

		For answers to your Monogram,® GE Profile™ or
	Listed by	GE appliance questions, visit our website at
	Underwriters	GEAppliances.com or call
R	Laboratories	GE Answer Center® service, 800.626.2000.