Monogram.“
ZIR36NM – GE Monogram 36"
1/4" Accessory Panels:
Factory trim accepts accessory panel kits. Panels are cut to size and ready to install. Kits must be ordered separately.
| White | Black | Stainless |
Models | Lexan® | Lexan® | Steel |
ZIR36/ZIF36 | ZWWR36 | ZWBR36 | ZWSR36 |
ZKHR1 – Provides the necessary framework to install a custom handle of your choice, onto a 1/4" thick custom panel. (Handle not included.)
ZKHTR1 – Provides the necessary framework to install a cus- tom handle of your choice, onto a 3/4" thick custom panel. (Handle not included.) This kit must be used in combination with ZKTR36LH or ZKTR36RH.
ZKHRSS1 – Tubular stainless steel handle for 1/4" thick panel installation.
ZKHTRSS1 – Tubular stainless steel handle for 3/4" thick panel installation. This kit must be used in combination with ZKTR36LH or ZKTR36RH.
ZKTR36LH for ZIR36NMLH, ZIF36NMLH
ZKTR36RH for ZIR36NMRH, ZIF36NMRH
Provides for the installation of 3/4" thick custom door and grille panels. Use this kit for a trimless appearance. This kit provides a standard handle to fit the 3/4" panel.
Grille Panel – For Installation height adjustments!ZGC2 – Provides 1/4" grille panel frame side pieces for
ZUG75 Trim Kit – For
units. This kit contains a trim strip to cover the inside case trim for a finished appearance. This kit must be used in combination with BOTH the ZKTR36LH and ZKTR36RH kits.
•Side panels are required whenever the sides of the product will be exposed and when installed between frameless cabinets.
•Side panels are not required when installed into an enclosure.
•Side panel installation will be determined by the design of the side panel you have previously chosen.
•Side panels must be installed plumb.
Illustration A | 23 9/16" | |
1/4" Side Panels – Insert |
|
|
end of side panel into case |
|
|
trim. Fasten with hook and |
|
|
loop strips. |
|
|
|
|
|
| 84" | |
Trim |
|
|
|
|
|
•If you choose to use 1/4" side panels, they should be inserted into the case trim as illustrated. Fasten the panels to the product with
•1/2" to 3/4" side panels are normally set into place and fastened to adjacent cabinetry or the back wall before rolling the product into the opening. See illustration B.
Illustration B | 24 3/4" | |
1/2" to 3/4" Side Panels – |
|
|
Leading edge of side panel |
|
|
is flush with cabinet front. |
|
|
Fasten to the back wall |
|
|
using a cleat. |
|
|
|
|
|
| 84" |
Top View
2 9/16"
3 3/4"
Top View
Standard 4" high toekick or trim to fit. Height may vary depending on application.
Specification Revised 4/05 110160
Standard 4" high toekick or trim to fit.
Height may vary depending on application.
|
| For answers to your Monogram,® GE Profile™ or |
| Listed by | GE appliance questions, visit our website at |
| Underwriters | GEAppliances.com or call |
R | Laboratories | GE Answer Center® service, 800.626.2000. |
|
|