GE ZIS420NX Side-by-Sidein inches, 1/4 Framed Panel Dimensions, 3/4 Overlay Panel Dimensions

ZIS420NX

GE Monogram® 42" Built-In Side-by-Side Refrigerator

Dimensions and Installation Information (in inches)

3/4" Overlay Panel Dimensions

For a more custom appearance, overlay panels may be installed on trimmed models. The overlay panel must be secured to a 1/4"- thick backer panel which slides into the trim. A spacer panel 0.10" thick must be placed between the overlay and backer panels.

.250" + .10" + .750" =

1.100" Total Panel Thickness

Center each panel over the other. Assemble the panels with glue and screws. Screws

Door

3/4"

Overlay

Panel

1/4"

Backer .10"

Panel Spacer

Overlay Panel

A

Grille Panel

Freezer	Fresh Food
Panel	Panel

Important Note: Maximum total

panel weight:

B• Fresh food door panel – 75 lbs.

• Freezer door panel – 53 lbs.

• Grille panel – 18 lbs.

C

must be countersunk into the backer panel.

NOTE: Left-to-right offset is not always equal to top-to-bottom offset.

Spacer Panel

Backer Panel

D E

42" Side-by-Side (in inches)

A	B	C	D	E
1/4" Backer Panel 39-7/8	9-1/2	68-3/8	14-9/16	24-9/16
.10" Spacer Panel 39	8-5/8	67	13-1/4	23-1/4
3/4" Spacer Panel 40-1/8	9-3/4	68-5/8	14-13/16	24-13/16

1/4" Framed Panel

Dimensions

If you choose to install framed

panels, they must be cut to the Door dimensions shown. The panels will

slide into the frame on the door and grille.

If the custom panel is less than 1/4" thick, and it fits loosely in the door frame, it can be backed up with a piece of filler material or foam tape to improve the fit.

Important Note: Maximum weight for fresh food panel is 50 pounds and 30 pounds for freezer panel.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

5/16"	39-7/8
Trim

Reveal			Grille Panel				9-1/2
1/4"
				17-13/16
Panel	Dispenser
		Cutout
	3-1/8						68	-3/8
	Freezer					Fresh
	Panel					Food
	14-9/16				24-9/16

Listed by

Underwriters

Laboratories

Specification Revised 11/08 110166