Cisco Systems N55M4Q manual Installing the Cable Guard Optional, Washer

Chapter 2 Switch Installation

Installing the Cable Guard (Optional)

Installing the Cable Guard (Optional)

The cable guard prevents tampering with the cables after the cables are installed. The cable guard (CMP-CBLE-GRD=) is not included with the switch, but you can order it from your Cisco representative.

Note You can use the cable guard when the switch is mounted on a desk, under a desk, or on a wall.

The cable guard is shipped with these items:

•Two 0.5 in. (12.7 mm) number-8 Phillips wood screws

•Two number-10 Phillips pan-head screws

•Two washers

Step 1 (Optional) Attach the supplied washers before you install the cable guard. See Figure 2-28.

Note This is only required if you are not installing the wall-mount brackets.

Figure 2-28 Using the Washer

		SYST
		STAT
		DPLX	1
MODE		SPD			2
					3		Series	PD
		PoE			4	5
	CONSOLE	PD				6
						8
						7
			POW
			ER	OVER	E
					THERNET	1
						2

330047

1

1

Washer

	Catalyst 3560-C and 2960-C Switch Hardware Installation Guide
2-28	OL-23803-02