GE ZISW420DM Monogram, 3/4 OVERLAY PANEL DIMENSIONS, IMPORTANT NOTE - Dispenser Models

Monogram.™

ZISW420DM – GE Monogram 42" Built-In Refrigerator with Dispenser and Water Filter

3/4" OVERLAY PANEL DIMENSIONS

For a more custom appearance, overlay panels may

be installed on trimmed models. The overlay panelDoor must be secured to a 1/4" thick backer panel which

slides into the trim. A spacer panel 0.10" thick must be placed between the overlay and backer panel.

Assemble the panels with glue and screws.

•Center the spacer panel on the backer panel, left to right and top to bottom. Secure the panels with glue.

•Center the spacer and backer panel on the overlay panel and secure with glue and screws. Screws

must be countersunk into the backer panel.	1/4"
	Backer
	Panel

3/4"

Overlay

Panel

.10"

Spacer

Overlay Panel

Spacer Panel

Backer Panel

NOTE: Left-to-right offset is not always equal to top-to-bottom offset.

.250" + .10" + .750" = 1.100" Total Panel Thickness

IMPORTANT NOTE – Dispenser Models

The refrigerator is supplied with two dispenser trims, one for framed panels and one for overlay panels. The overlay dispenser trim is designed to fit a total panel thickness

of 1.100".

•If the panel is less than 1.100" a noticeable gap may be created around the dispenser trim.

•If the panel is more than 1.100" the dispenser trim cannot be secured to the door.

•The overlay panel must be constructed according to the specifications shown to achieve the correct total thickness.

•Alternative panel construction methods such as securing a 3/4" panel to a 1/4" backer panel cannot be used. Another method, routing a 3/4" thick panel on all sides cannot be used. These methods will not result in the required 1.100" panel thickness.

A

Grille Panel
	B

Dispenser Cutout

15-3/8"

*Cut the dispenser opening after the backer, spacer and overlay panels have been assembled.

IMPORTANT NOTE: Maximum total weight for assembled fresh food panel is 50 pounds and 30 pounds for freezer panel.

Dispenser

Cutout

F

9-5/8"

*Dispenser

Cutout Position

G

Freezer

Panel

Fresh Food

Panel

C

	A	B	C	D	E	F	G
1/4” Backer Panel	39-7/8	9-1/2	68-3/8	14-9/16	24-9/16
.10” Spacer Panel	39	8-5/8	67	13-1/4	23-1/4
3/4" Overlay Panel	40-1/8	9-3/4	68-5/8	14-13/16	24-13/16	17-15/16	3-1/8

D E

Specification Revised 8/03

				For answers to your Monogram,® GE Profile™ or
	Listed by			GE® appliance questions, visit our website at
R	Underwriters			GEAppliances.com or call
		GE has determined that this product
	Laboratories	As an ENERGY STAR® Partner,
			meets the ENERGY STAR®	®
		guidelines for energy efficiency.		GE Answer Center service, 800.626.2000.

110176