Installation Instructions
ZKHCSS2
Tubular Stainless Steel Handles
and Handle Side Trim
Before you begin – Read these instructions completely and carefully. Note to Installer: Be sure to leave these instructions with the Consumer.
Note to Consumer: Keep these instructions with your Owner’s Manual for future reference.
Right hand door swing models are illustrated in these instructions. Follow these same instructions for left hand models.
This kit provides for the installation of Tubular Stainless Steel handles or custom handles on 3/4" overlay custom panels.
A
B
C
Tools and materials required:
• #2 Phillips screwdriver |
• Drill and 7/32", 1/8" bits and 7/8" spade bit |
D
F
• Custom door panels, |
• Safety glasses |
• Center punch |
• Hammer |
• Pencil |
Parts List:
A. Freezer tubular handle (95376) and fresh food tubular handle (95377)
B. 4 Handle standoffs, 70536
C. 6 Screws for handle standoffs
E. 3/32” Allen wrench for set screws, 70548 F. 6 Plastic spacers (4 required, 2 extra) 70540 G. 5 Trim screws (4 required, one extra) 8665
H. Handle side trim for LH models (75468), trim for RH models (75469)
E
G
H
STEP 1 REMOVE DOOR AND DRAWER HANDLES
•Open refrigerator door to 90°. Remove the 4 screws holding the handle to the door.
•Remove 4 screws holding handle side trim. Discard all screws and trim. Discard handle.
•Open freezer drawer to access handle and trim. Remove and discard handle, retain screws and trim.