Custom Trim
Refrigerator
Door
Trim to Panel Fit
STEP 3 INSTALL ASSEMBLED PANELS
Install 4
Handle Side
Trim Screws
•Install custom handles according to the manufacturer’s instructions.
• Slide assembled door panel into the trim.
• Determine the correct trim for your model (for left or right door swing). Place trim against the side of the refrigerator door, aligned top to bottom. The holes in the trim should align to the holes in the door. Discard the other trim piece.
•Remove trim. Use a 1/8" bit to drill the
•Secure the new custom handle side trim using the supplied screws.
Install
8 Screws
•Slide assembled panel into the drawer trim.
•Secure the original drawer trim using original round head trim screws.