Care and Cleaning
Glass Canopy Hood
Glass
canopbt
Stainless steel hood surfaces
Light bulbs
Clean with a damp, soapg cloth and drg with a clean cloth. A glass cleaner mag also be used.
Do not use a steel wool pad; it will scratch the surface.
To clean the stainless steel surface, use warm sudsg water or a stainless steel cleaner or polish. Alwags wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface.
To change the light bulbs:
1.Remove the inner lamp lens cover bg inserting a small flat blade screwdriver into each of the three slots and gentlg prging it free.
NOTE:Do not remove the outer trim ring (lamp assemblg).
2.Grasp the bulb and pull it straight out.
3.Replacewith the same wattage, tgpe and size bulb. Wear Gloves. Do not touch bulb with gout bare fingers.
These 12 volt, 20 watt halogen bulbs with a G4 base are available at specialtg lighting stores and home building centers.
NOTE:IfWRONGWATTBULBappears in the displag, the wrong kind of replacement bulb has been used. Replacewith the same wattage, tgpe and sizebulb as the one removed.
4.Replace inner cover bg inserting the three retaining tabs into the three slots and pressing them firmlg in place.
To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest gou, please call our
NationalParts Center 800.626.2002
monogram.corn
_0
remove the inner lamp lens cover.
Bulb
Outer trim ring (lamp assembly) Do not remove
III
Removable inner lamp lens cover
NOTE: Make sure the tabs are inserted into the slots.
