ZVB36SN/BN
GE Monogram® 36" Telescopic Downdraft Vents
Dimensions and Installation Information (in inches)
Creative Solutions
Maintain Cutout Clearances | Trim | ||||||
to Front Edge as Specified |
| ||||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add a Bullnose
Trim or Decorative
Molding to DOWNDRAFT
IncreaseVENT
Countertop
Depth and to
Maintain
Required
Clearance From
Front Edge
| Filler Panel |
Filler Panel | Base Sink |
| |
Base Cabinet |
|
Against-the-wall installation
Move the base cabinet forward, 3" to 5". Filler panels or complimentary moldings can be added to the exposed cabinet sides.
Countertop Overhang per Cooktop
Clearances Must be Maintained
Base Sink | End | |
Panel | ||
|
Cover Panel 
Island or peninsula installation
Use an
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
Decorative trim
When the cutout to front edge of the countertop requirement is more than 2", add a bullnose trim to the front edge of the countertop. The additional trim allows the cooktop to be moved forward, providing additional countertop depth and interior cabinet space.
Optional Accessories
JXRB67 Accessory for indoor remote location of the blower/ motor assembly. Use this kit when the blower and motor assembly will be located outside of the cabinet, such as below the cabinet floor. The assembly will fit between 16" floor joists.
JXBC67 Outdoor cover accessory for remote installation of the blower/motor assembly on an outside wall.
Ductwork
Prepare the ductwork to vent to the outdoors.
•Plan the shortest and straightest route for venting exhaust to the outdoors.
•The maximum permissible length for the duct run is 150 feet.
•Use metal ductwork only.
•The downdraft blower system is designed to use
•Install a wall cap or roof cap with damper at the exterior opening. Order the wall cap and any transition needed in advance.
Listed by
Underwriters
Laboratories
Specification Created 11/08 | 130676 |
